• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

PRT PCV oil separator *interest check*

Status
Not open for further replies.
SVTJON87 said:
you know what might be a good idea? sending 2 upgraded o-rings with each filter. if it needs to be at a additional cost. one for back up.
Click to expand...

There's no reason a quality o-ring should fail, i think supplying the unit already fitted with an upgraded piece would be sufficient, but if someone wants additional rings, they'll just have to pay for them, and o-rings are cheap.
 
Don't know what you mean by quality, but a basic neoprene or rubber O ring will eventually fail when exposed to heat and oil. Quite simply, it's the nature of the beast.

I've had my filter/seperator setup on my car for approx. a year & 1/2 and am providing others with the benefit of my experience(s). Your experience MAY differ.
 
Bradness said:
Don't know what you mean by quality, but a basic neoprene or rubber O ring will eventually fail when exposed to heat and oil. Quite simply, it's the nature of the beast.
Click to expand...

What i meant by that was i will supply the separators in my kit with the Viton o-ring.
 
Lets make this just a tad easier for me later:

Interested: Single filter system for PCV, approx price $35

1)
2)
3)

Interested: Dual filter system for PCV and VC vents, approx price $70

1)
2)
3)
 
Lets make this just a tad easier for me later:

Interested: Single filter system for PCV, approx price $35

1)brapple
2)
3)

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)
 
SVT#4967 said:
will the dual filter system include a bracket that would mount both filters?
Click to expand...

yup ...

Pole120 said:
Also, i will look into replacing the o-rings that come standard on the separators as well as configuring another bracket layout and fitting arrangement that will accommodate (2) separators for those wishing to vent the VC's as well. :cool:
Click to expand...
 
Interested: Single filter system for PCV, approx price $35

1)brapple
2)LUCA x 4
3)

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)
 
Pole120 said:
Also, i will look into replacing the o-rings that come standard on the separators as well as configuring another bracket layout and fitting arrangement that will accommodate (2) separators for those wishing to vent the VC's as well. :cool:

Thank you for your patience and understanding.

~Josh
Click to expand...

Glad to hear this.
 
Interested: Single filter system for PCV, approx price $35

1)brapple
2)LUCA x 4
3)OB1 x 2

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)
 
Interested: Single filter system for PCV, approx price $35[/B][/U]

1)brapple
2)LUCA x 4
3)OB1 x 2
4)99redSVT
5)SVTJON87

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)

added myself to the list...:)
 
Last edited:
Interested: Single filter system for PCV, approx price $35

1)brapple
2)LUCA x 4
3)OB1 x 2
4)SVTJON87
Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)
 
Interested: Single filter system for PCV, approx price $35

1)brapple
2)LUCA x 4
3)OB1 x 2
4)99redSVT
5)SVTJON87
6)Yawak

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)

i'm interested...
 
Interested: Single filter system for PCV, approx price $35

1)brapple
2)LUCA x 4
3)OB1 x 2
4)99redSVT
5)SVTJON87
6)Yawak
7)Brent372

Interested: Dual filter system for PCV and VC vents, approx price $70

1)brapple
2)
3)
 
Status
Not open for further replies.
Back
Top