D
devanmc
Guest
so to start off i have a cel. The definition for the code is that their is a short in the camshaft position sensor. With some help from a local CEG'er, i was able to find the short the repair it. Well problem now is, i still have the problem.
problem: while driving(car running for around 10min). the vct will not engage (adjust exhaust cam) and it will buck, grind and lose power while trying to adjust. I have figured out how to feather the gas or (atx) hold it in first or second to compensate for this problem(sometimes), but its still not good.
Though i may add when the car is first started(cold) or has sit for 15-20min(still hot) it does not have this problem, for the first 5-10mins-ish while driving. After the 5min it get progressively worse.
im starting to think its something other then the sensor...
any help is greatly appreciated.
problem: while driving(car running for around 10min). the vct will not engage (adjust exhaust cam) and it will buck, grind and lose power while trying to adjust. I have figured out how to feather the gas or (atx) hold it in first or second to compensate for this problem(sometimes), but its still not good.
Though i may add when the car is first started(cold) or has sit for 15-20min(still hot) it does not have this problem, for the first 5-10mins-ish while driving. After the 5min it get progressively worse.
im starting to think its something other then the sensor...
any help is greatly appreciated.