robertseber
CEG'er
has anyone ever heard of this does it work kinda makes sense somebody let me know i seen it over on probetalk
Kerosene engine flush...Step by step...
1. Drain oil except one quart, or you can drain all the oil and add one quart of new oil. (starting with a NEW oil filter is recomended).
2. Add the remainder as kerosene, approx. 3 quarts.
3. Start the engine. DO NOT REV THE ENGINE
4. let it run until warm, not HOT, just warm. About 5-10 mins.
5. Drain the entire contents.
6. Add one quart oil, 3 quarts kerosene.
7. Run the engine again until slightly warmer. DO NOT REV THE ENGINE
8. Drain the entire system.
9. You can pour Kerosene into the NON-running engine as it drains out untill it comes out clear.
10. Pour about one quart of oil and let it run out of the oil pan.
11. Add your favorite oil/oil filter.(replace oil pan plug...:razz
12. Run engine until its at operating tempature. Check to make sure it is running ok.
13. Optional...You can drain the system one last time and add new oil filter and oil...
This does a great job...
The residue that comes out should be quite black and a thin liquid...Chunks or sludge should be disolved...
Note:
those who use Quaker State oil may experiance chunks and or sludge when draining the system through out the procedure...This is typical of Quaker State oils...
Kerosene engine flush...Step by step...
1. Drain oil except one quart, or you can drain all the oil and add one quart of new oil. (starting with a NEW oil filter is recomended).
2. Add the remainder as kerosene, approx. 3 quarts.
3. Start the engine. DO NOT REV THE ENGINE
4. let it run until warm, not HOT, just warm. About 5-10 mins.
5. Drain the entire contents.
6. Add one quart oil, 3 quarts kerosene.
7. Run the engine again until slightly warmer. DO NOT REV THE ENGINE
8. Drain the entire system.
9. You can pour Kerosene into the NON-running engine as it drains out untill it comes out clear.
10. Pour about one quart of oil and let it run out of the oil pan.
11. Add your favorite oil/oil filter.(replace oil pan plug...:razz
12. Run engine until its at operating tempature. Check to make sure it is running ok.
13. Optional...You can drain the system one last time and add new oil filter and oil...
This does a great job...
The residue that comes out should be quite black and a thin liquid...Chunks or sludge should be disolved...
Note:
those who use Quaker State oil may experiance chunks and or sludge when draining the system through out the procedure...This is typical of Quaker State oils...