todras
Pretty fly for a white guy *cowbell*
Man you have issues if that's your hang up.
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
It's begun...
- Thread starter Pole120
- Start date
Pole120
Addicted CEG'er
We're doing them tomorrow....:shrug:
My fluid is beyond bad.....it has to be changed, so i might as well put the lines on right away.
striker2
Official CEG Vendor
its called a vacuum bleeder. the only thing you ahve to worry about then is keeping the master cylinder full of fluid.
Bleed the old **** out first. Flush out the new lines too. You can still get debris in new lines. Bleed your clutch while your at it. You'll be amazed with the pedal feel after new fluid and SS lines.
Frosty
Hard-core CEG'er
Still need someone to help you out?
Pole120
Addicted CEG'er
Mike and I are going to try and get it done tonight. The game plan I think is to flush the fluid with the stock lines in place, then replace them and bleed the new lines out. We are doing the clutch as well. If I would have thought about this a while ago i would have installed speed bleeders....
~Josh
todras
Pretty fly for a white guy *cowbell*
I'm guessing the things from the UK are SS tank covers?
Pole120
Addicted CEG'er
onder:Suba Blu
Hard-core CEG'er
I know what the UK parts are. 
Frosty
Hard-core CEG'er
I know what it is too:laugh:
I have polished aluminum tanks :drool:
I have polished aluminum tanks :drool:
BK4293
Hard-core CEG'er
:shrug: You can't bleed brakes by yourself with the proper tools??? :shrug:
Last edited:
Pole120
Addicted CEG'er
Lat night got the new fluid pushed through and got half way done with the line swap and found out the rear lines they sent me are wrong, i need (2) male ends on the rear lines and they sent male/female....so i'll be on the phone with them today doing some *****ing. But the front lines are in and everything is bled with the new ATE superblue fluid...the brakes are a whole new beast...that old fluid was beyond bad.
Also got my new lugs installed and lowered the car again since the exhaust re-work.
All that's left on my list is:
My car:
Mirko install
Re-hook up oil pressure gauge
Paint/install fuse box cover
Wash the car
Wax the car.....BWAHAHAHAHAH just kidding :laugh: :shrug:
New end links on rear suspension arms
Mikes car:
Grill ring swap
Also got my new lugs installed and lowered the car again since the exhaust re-work.
All that's left on my list is:
My car:
Mirko install
Re-hook up oil pressure gauge
Paint/install fuse box cover
Wash the car
Wax the car.....BWAHAHAHAHAH just kidding :laugh: :shrug:
New end links on rear suspension arms
Mikes car:
Grill ring swap
RialKnight
CEG'er
Pole120
Addicted CEG'er
That's only two hours work....no biggie. I'm relaxing tonight/tomorrow finally.
hetfield
or hetfeild
If we don't take six trips into Sussex for food/hardware/etc. Actually, I have to hit the Ace before getting to the shop tonight
Pole120
Addicted CEG'er
If we don't take six trips into Sussex for food/hardware/etc. Actually, I have to hit the Ace before getting to the shop tonight
:laugh: This is true
That's fine, i have to stop for your screws on the way there as well.
Frosty
Hard-core CEG'er
Is he doing a painted grille?
Pole120
Addicted CEG'er
No just swapping rings for the show, the spare that's on his car right now has the same disease yours does.
Frosty
Hard-core CEG'er
:laugh:
Ah, I see. Cool