-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
GROUP BUY: Lower Intake Manifold big bore.
- Thread starter svtfixer
- Start date
- Status
qbcsvt
Hard-core CEG'er
Ouch Back injury? Hope you feel better!
Thanks for expanding the CSVT's aftermarket
- amyn
Thanks for expanding the CSVT's aftermarket
- amyn
SHOpartsNW
CEG'er
- Joined
- Aug 4, 2008
- Messages
- 59
Yeah, the back injury is going on 3+ months, but I am finally getting to the point I can do some moderate work back in the shop.
We just shipped 5 of the LIMs. I need a few more small plugs to finish the last two, but they will ship soon.
Mike
We just shipped 5 of the LIMs
. I need a few more small plugs to finish the last two, but they will ship soon.Mike
Yeah, the back injury is going on 3+ months, but I am finally getting to the point I can do some moderate work back in the shop.
We just shipped 5 of the LIMs
Mike
Got my tracking number this afternoon, thanks!!
~Mike~
LOUDSHO92
CEG'er
A picture:
starjammir
Hard-core CEG'er
Did mine go out too guys?
SHOpartsNW
CEG'er
- Joined
- Aug 4, 2008
- Messages
- 59
Your intake has not shipped yet because it is "special".
I will send you a PM with the details.
Mike
SHOpartsNW
CEG'er
- Joined
- Aug 4, 2008
- Messages
- 59
I finished up the last of the intakes over the weekend, and they should be shipping shortly.
Thank you for your patience, and I hope you guys enjoy them.
Mike
Thank you for your patience, and I hope you guys enjoy them.
Mike
imnotacop420
Squire of Awesome
got mine yesterday, thanks!!!
biminiLX
Hard-core CEG'er
So who plans on testing first?
-J
-J
Don't look for any tests from me anytime soon, my 3.0 is still in pieces in the garage. This was just another part on the stack. I need to get my UIM and cylinder heads port-matched, too.
I took a look at CSVT#49's ST220 thread and if I did my math right, the volume of these ports is 1983mm/square per cylinder, an ST220 intake is only 1588mm/square (That's a solid 25% increase in port volume over the ST220?!?!?!)
Obviously that's only a piece of the picture, but numbers are always fun to play with
~Mike~
Last edited:
qbcsvt
Hard-core CEG'er
pretty sure mine is here! I saw something that looked like it was in the shape. Thanks guys
- amyn
- amyn
starjammir
Hard-core CEG'er
Ill be trying mine out as soon as the weather breaks! Thanks again for the "special" one guys!
ContourGuy9817
Hard-core CEG'er
i would be interested in a second batch...also i dont remember if your on newcougar, but if not then you need to be! newcougar.org!
LOUDSHO92
CEG'er
We actually have a few extra sets. Order now!
We are there as well.
We are there as well.
ContourGuy9817
Hard-core CEG'er
okay, let me liquidate some extra shiz, gimmie a week or less 
i'm returnless as well...if it matters...
i'm returnless as well...if it matters...SHOpartsNW
CEG'er
- Joined
- Aug 4, 2008
- Messages
- 59
I think we have four LIMs bored out that we can sell on an exchange basis. We would need you to send in your SVT core and I would reassemble the bored out intake with your actuating rods and our new custom plates.
Once these four LIMs are sold, we would need to get another group run of at least 5 to make another run. Since it took almost a year to do that, I am betting thes four may be the last four we make. On top of that, you guys might need to buy me a case of something good to convince me to take on disassembling another batch of LIMS.
Mike
Once these four LIMs are sold, we would need to get another group run of at least 5 to make another run. Since it took almost a year to do that, I am betting thes four may be the last four we make. On top of that, you guys might need to buy me a case of something good to convince me to take on disassembling another batch of LIMS.
Mike
LOUDSHO92
CEG'er
Which girly drink is that? :laugh:
- Status