KyleH
CEG'er
Which lines do you need? I may have some.
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Anyone up for helping me do engine swap?
- Thread starter SVTED
- Start date
SVTED
Veteran CEG'er
basically i have the line for the brake booster but i need the other ones (fuel regulator, EGR, i dunno what else it connects to...)
boarder4life
CEG'er
- Joined
- Oct 31, 2007
- Messages
- 30
Basically the lines going to the accessories other then his HVAC have been snapped in half, some at the splitters. Probably easiest just to replace the lines coming off the the vacuum tree straight to all the other connections.
SVTED
Veteran CEG'er
and i just remembered we didn't connect that connector that was cut. I don't even remember where that connector goes anymore...
boarder4life
CEG'er
- Joined
- Oct 31, 2007
- Messages
- 30
the coolant temp sensor, there are 2 on the coolant divider/splitter (wat ever u want to call it) the one of the rear has nothing connected to it. its that one you need to connect it too.and i just remembered we didn't connect that connector that was cut. I don't even remember where that connector goes anymore...
SVTED
Veteran CEG'er
is that the thing with two big coolant hoses? im not seeing a missing connector
boarder4life
CEG'er
- Joined
- Oct 31, 2007
- Messages
- 30
yes, the sensor is on the backside of it facing the cab of the car.
the connector is sitting on the table in the shop
the connector is sitting on the table in the shop
SVTED
Veteran CEG'er
yes, the sensor is on the backside of it facing the cab of the car.
the connector is sitting on the table in the shop
awesome. found it
and now i'm gonna whip up those vacuum lines