• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Regional classifieds

For Sale: E1's good condition has rubber on them but I wouldn't run them. Rims are in good shape I'll try and get a picture.

*edit*

I also need a 100% complete AC system for my car, both lines, condensor, good compressor, and evap. I will need it before Wednesday or else I just have to get one at the junkyard.
 
Yes My SVT is for sale...

To much to list, but I will get a list Together shortly

Work done to the car since I owned it (past 2 years)

3L port matched 05 sable motor w/around 30k
Torsen
Fidenza Flywheel
MSDS Headers Coated
MSDS y-Pipe Coated
Trubendz Hi-flow cat
Custom Cat back Magnafflow to dual Bosal's 2.5" pipe
Pole filled tranny mount
ES front motor mount
New OEM clutch
Xcal 2 With custom NPG tune still needs tweaking
triple gauge pod Glow shift white seires Boost/vac, Oil temp, oil pressure
Short shiffter w/ cougar knob
Red Ford 9mm raceing wires
Optima Red top relocated to the trunk, Custom billet mount
Custom Cold Air Intake
Front and Rear strut bar
Eibach GC/coilovers new front strut mounts rears mounts should be changed.
NPG brake kit Drilled slotted rotors
SS lines
raysbestos pads
Dorman control arms /w Upgraded balljoints
Innovative racing 21mm sway bar
Boxed in rear sub
bradness rear control arms
Moog problem solver front sway Links
New rack and Pinion
new trail arms w/ ES bushings pressed in to the rear knuckle
Hella angel eye fogs
Fog light mod
Full red LED interior inculding sunroof switch
10k hids W/eyelids
CF hood & trunk
17"FSVT /w COnti conatact II
Alpine head unit w/ Ipod cable
4x Pioneer 3way's Powered by 600w pioneer amp
Bazzoka Tube (NOS bottle) powered by 250w clarion amp
20% tint
Momo course pedals
Innovative heel plate
Auto page Alarm
Redline tuning hood struts

Mirko W/Pole skid plate and Axis Rims are for sale Separately, since they are off the car atm

I'll keep adding as it comes to mind

and pic's here third page
 
Last edited:
Listing for friend,

04 Taurus 3L, 40K. Recently pulled from running car (not sitting around junkyard for years).

can be delivered within reason, pm for price

sold
 
Last edited by a moderator:
I have a Trubendz Borla Stainless Cat-Back exhaust available for sale...

I welded in 2 magnaflow resonators before the tips... welds look a little rough. Whole thing is stainless steel piping and mufflers/ resonators...

I also have a kit with 3" straight pipes that I could weld on instead of the resonators...
I will install it for you and work out how you want the tips done as well...

PM for price... it will be much cheaper than you think!
and it will include free installation on Contour or Cougar!
( Everything cost me over $700)



Stuff needs to go... I want to finish getting parts for my SVT!!!
 
Last edited by a moderator:
I didn't want to sell this but I have to move (again) and finish my car at the same time. I can install if needed.

Zex 10 Lb Bottle
Zex Control Box
Zex Mounting Brackets
Zex Purge Valve w/ line
Nitrous feed lines
Comes with ~25,~50,~75 shot jets.
 
Last edited by a moderator:
for sale :shocked:

svt front bumper black ....PM FOR PRICE
svt rear bumper black....PM FOR PRICE
Svt side skirts"w/covers"......175 shipped

axis neo's with great rubber cooper zeon 2xs
will take your rims and decent tires plus 400 bucks

picture of the car with rims and bumpers
 

Attachments

  • contour 3.jpg
    contour 3.jpg
    62 KB · Views: 0
Last edited by a moderator:
ROH SR rims with tires

ROH SR rims with tires

Fair Shape. Best offer takes them. Set of 4 rims and tires. Tires pretty much new, lots of tread. Rim is just dirty, I'll clean it up..

IMG_2428.jpg
 
Computer chip for DDY3 computer code.

Computer chip for DDY3 computer code.

2.0L automatic 1998 Ford Contour DDY3 computer code.

Best offer takes it

IMG_2427.jpg
 
AEM alt pully and UR crank pully for 2.0L zetec engine.

Need to grab a pic but they are in perfect shape.

Best offer and can install if you wish.

SSPX0204.jpg

SSPX0205.jpg

SSPX0206.jpg
 
SVT Exhaust with no resonator. Drive here and I'll install it with stainless hardware.

Svt_catback.jpg
 
FS: Trek 7.2 FX Hybrid/Road Bike

FS: Trek 7.2 FX Hybrid/Road Bike

Last fall I was given this bike and had planned to use it for winter rides, but I got a set of rollers instead so it hung in the garage away from the salt and sand. My girlfriend has been riding the bike since this spring and we have finally let ourselves see the truth that it is much too big for her. With that in mind, we need to sell this bike and buy her a nice road bike that actually fits.

As stated before, I was given this bike BRAND NEW. Picked it up from Newington Bike in Newington, CT. In total, this bike has about 100 miles on it and is is as close to brand new condition as you can get! The frame size is 17.5" in the men's style and the bike is matte gold in color. For more detailed spec's, please visit the Trek link below. I can provide pictures if anyone would like so just let me know and I'll get it done!

http://www.trekbikes.com/us/en/bikes/bike_path/fx/72fx/
 
1959 Fiber Glass Cutter boat with 1974 Evinrude Engine

1959 Fiber Glass Cutter boat with 1974 Evinrude Engine

Any offers welcome. Carb kit on it's way, Horns also on the way. Will be replaceing plugs and gas/oil mix so it runs nice, for anyone who checks it out.

3ma3o23lcZZZZZZZZZ96sa86532705b4e10.jpg


3kd3o43l4ZZZZZZZZZ96s1152ad7b503a17.jpg
 
WTB: filler neck to gas tank.

WTB: filler neck to gas tank.

One that is in fair shape that i could maybe clean up and hit with some rust stop.
 
MOUNTAIN BIKE PARTS:

-Hayes V6 rotors, cadmium plated and custom powdercoating
-Hayes high perfromance pads for mechanical brakes
-Hayes 6" disc brake adapters, front and rear.

Possibly more coming soon.
 
You must log in or register to reply here.
Back
Top