TK95Contour
CEG'er
Hello, Im planning on doin a motor swap in my 95 contour SE. Its a 2.5 Duratec with a 5 speed. 2 days ago i came across a 1999 Contour sport V6 auto with 45k miles, totally spotless but had been rear-ended and therefore totaled. I pulled the entire motor from it and got it for $100!! Its completely clean , has fresh oil and i cant find a single leak anywhere. Now ive searched for answers and didnt find anything that answered my specific questions which are ::
1. What cant i use off the 99s motor?
2. What sensors/plugs/fuel lines or injectors will need to be changed??
3. Do i need to swap flywheels?
4. Anything specific i should do/know before pulling my engine??
Now the motor thats in my car burns and leaks oil majorly and i figured instead of rebuilding id just replace. I thought about doing the 3L but would rather just put another 2.5 in it and make it as easy as possible. I know the IMRC is totally different because mines vacum , but i was just wondering if anybody could give me any info before i jump into it. I need all the help i can get and hope to have the motors swapped in a weekend or so. Thanks alot for helping keep my contour on the road! Ive gained a ton of knowledge here on the contour and know this is the best place to ask about performing my first motor swap!!! Thanks again!
1. What cant i use off the 99s motor?
2. What sensors/plugs/fuel lines or injectors will need to be changed??
3. Do i need to swap flywheels?
4. Anything specific i should do/know before pulling my engine??
Now the motor thats in my car burns and leaks oil majorly and i figured instead of rebuilding id just replace. I thought about doing the 3L but would rather just put another 2.5 in it and make it as easy as possible. I know the IMRC is totally different because mines vacum , but i was just wondering if anybody could give me any info before i jump into it. I need all the help i can get and hope to have the motors swapped in a weekend or so. Thanks alot for helping keep my contour on the road! Ive gained a ton of knowledge here on the contour and know this is the best place to ask about performing my first motor swap!!! Thanks again!