FrostCougar
New CEG'er
This is cross-post from the NECO forums.
http://www.newcougar.org/forums/showthread.php?t=109786
Moderator of this section: Please let me know if you require more info on this, and I will update. I'm cross-posting to get more individuals involved. I will update this thread as time goes on.
--------------------------------------------------------------------------
Here it is again, a Group Buy for Extrude Honing our Upper Intake Manifolds.
Price: $285 (at least 10 buyers)
I'm going to set this up for one month only, so get in while you can.
Address to send them to:
Extrude Hone Corp.
1 Industry Blvd.
P.O. Box 1000
Irwin, PA 15642
Direct Contact: Rick Miller (724-861-8694)
You are responsible for shipping your intake, which ever method you choose. You also need to pay for return shipping, in which you will be charged after the process.
Please include a packing list with your UIM, including your NAME, DAYTIME PHONE NUMBER, and RETURN ADDRESS. Also note that you are part of the NECO GROUP BUY, so you are charged accordingly.
You will be contacted and charged after the process is done, so make sure you give the correct contact number for yourself.
This extrude hone process takes up to 3 weeks.
Note: I highly advise that you all take out the black clips on top of the manifold, that hold the vaccuum lines in place, along with the end caps for the runners. This is in case they are lost or not sent back to you.
First Group Buy thread for reference: http://www.newcougar.org/forums/showthread.php?t=91836&highlight=extrude+honed
http://www.newcougar.org/forums/showthread.php?t=109786
Moderator of this section: Please let me know if you require more info on this, and I will update. I'm cross-posting to get more individuals involved. I will update this thread as time goes on.
--------------------------------------------------------------------------
Here it is again, a Group Buy for Extrude Honing our Upper Intake Manifolds.
Price: $285 (at least 10 buyers)
I'm going to set this up for one month only, so get in while you can.
Address to send them to:
Extrude Hone Corp.
1 Industry Blvd.
P.O. Box 1000
Irwin, PA 15642
Direct Contact: Rick Miller (724-861-8694)
You are responsible for shipping your intake, which ever method you choose. You also need to pay for return shipping, in which you will be charged after the process.
Please include a packing list with your UIM, including your NAME, DAYTIME PHONE NUMBER, and RETURN ADDRESS. Also note that you are part of the NECO GROUP BUY, so you are charged accordingly.
You will be contacted and charged after the process is done, so make sure you give the correct contact number for yourself.
This extrude hone process takes up to 3 weeks.
Note: I highly advise that you all take out the black clips on top of the manifold, that hold the vaccuum lines in place, along with the end caps for the runners. This is in case they are lost or not sent back to you.
First Group Buy thread for reference: http://www.newcougar.org/forums/showthread.php?t=91836&highlight=extrude+honed