KAOS_3.0
Hard-core CEG'er
so... I got every thing in, and tried to start it, it stumbles and pours gas fumes out the y-pipe, kicks back every few minutes while cranking it, but wont actually start. I'm pretty sure its too rich, but advice would be nice. will a 3l on a se pcm with 24lb injectors even start at all before a tune? if so, what else could be my problem. on a side note, I also lowered the front with my koni springs since it was almost all apart anyways. well I let my friend help and once I dropped it off the jacks the little washer things on top of the strut towers are floating about 1/3 of an inch above the tower, obviously not good. took them off and their bottoming out on the retaining nuts under them. so it seems like something isn't right with how the strut hats are on, anybody have that happen before? thanks for all the help guys