Just put the tranny on in hopes of putting the engine back in and found that the lower 3 bolts don't line up. I was told 2 didn't line up, and it didn't matter. I thought they were probably the two very bottoms ones but they were none of the ones I thought, it's definitly not acceptable, I'll put some pictures up later to explain. I can still see light through the lower half of the bellhousing. I modified it work work on the left side (ones still out but its fine). Now I just need to figure something out for the other side and once thats on its acceptable. I threw the old oil pan out sooo. I'll post some pictures later to show exactly what happens with 95 tranny and 04 oil pan.
I really need to see the 04 oil pan to know if I can drill through a certain spot its risky cause parts on a curve im not sure if it will leave a hole or not but I suppose it will still be worth it if it did have to fix that hole. So if you have an 04 oil pan laying around it would be sweet if you could snap a pic where I need it opposed to me dropping the pan to find out.
I really need to see the 04 oil pan to know if I can drill through a certain spot its risky cause parts on a curve im not sure if it will leave a hole or not but I suppose it will still be worth it if it did have to fix that hole. So if you have an 04 oil pan laying around it would be sweet if you could snap a pic where I need it opposed to me dropping the pan to find out.