cnewton44
Hard-core CEG'er
I got that....it was just a joke...:shrug:
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
Slight Change to the ST200
- Thread starter monkey_matt
- Start date
TourEnvy
Hard-core CEG'er
More talk about fitting the angle eyes in Contour lights....Monkey Matt didnt you say you bought the rings seperate a while back. forgive me if im wrong.
monkey_matt
CEG'er
yeah teh rings are seperate as they aint projectors
btcc93
CEG'er
I've been trying for about 4 or 5 years to get hold of an SVT bumper to replace the Brit spec bumper on my '98 Mondy so it would look different to any in the UK, and what do I find on here but M!key doing the exact opposite. Don't suppose you would consider exporting your SVT one to me?:shrug: 
:idea:
:idea:TourEnvy
Hard-core CEG'er
How hard was it? Can you send a link to the part info?
I've been trying for about 4 or 5 years to get hold of an SVT bumper to replace the Brit spec bumper on my '98 Mondy so it would look different to any in the UK, and what do I find on here but M!key doing the exact opposite. Don't suppose you would consider exporting your SVT one to me?:shrug:
M!key doesnt have an SVT anymore, I dont even think that bumper ever made it onto his SVT.
monkey_matt
CEG'er
can get the parts off Ebay, make sure you get CCFL rings and not LED like mine tho, gonna be changing mine to CCFL when i have the money, as they are much brighter.
then its just a case of opening up your headlight, attaching the rings, and wiring them up howver you want, mine are connected to what we call sidelights
monkey_matt
CEG'er
also sneek peak at the new exhaust 
gets fitted in a week 
The two tail pipes siting in my room
Test fit, just sitting over my old pipes
Close up on one side, fit much better in the holes now
gets fitted in a week The two tail pipes siting in my room
Test fit, just sitting over my old pipes
Close up on one side, fit much better in the holes now
Imo000
CEG'er
Nice!
monkey_matt
CEG'er
lol as I'm sure i've said, gonna be replacing all four alloys at some point anyhow, lol
But at the mo, i'm actually looking at selling her!!!!! to buy a Toyota Celica GT Convertible Generation 6, in fact this one
But at the mo, i'm actually looking at selling her!!!!!
to buy a Toyota Celica GT Convertible Generation 6, in fact this one
TheMexicanJob
Banned?
needs more GT-Four
monkey_matt
CEG'er
already planning on dropping the GT4 engine in, just a shame they never did the GT4 Convertible as standed. Only problem is that it'll be GT4 performance without the 4WD, so it'll all be going through the front wheels, the floor plan is different between the two cars
TheMexicanJob
Banned?
just do some in depth cutting and welding, it'll be worth it to have the only GT4 convertible ever.
monkey_matt
CEG'er
its already been done here in the UK, although that was done with a Gen5 not a 6
TheMexicanJob
Banned?
monkey_matt
CEG'er
hmmmmm could be the Only Gen 6 Full GT4 tho, DAMM YOU, getting me thinking now, lol
Obv I wouldn't go for the GT4 rear spolier tho, think it would just look odd on a Convertible
Obv I wouldn't go for the GT4 rear spolier tho, think it would just look odd on a Convertible
monkey_matt
CEG'er
And before any of you say anything, we DO get some decent weather over here to have a Convertible, we see the sun probably once a year, lol
TheMexicanJob
Banned?
i don't care, just do it.