removing RH side foglight assembly

[byron366]

Hello all. The right side foglight has never worked correctly. I replaced the bulb 3 years ago, and it worked for a week. It burned out after it rained. Its not a wiring problem, its the foglight casing that has cracked, letting water in. I need to know the easiest way to remove it so i can get a replacement. Thanks

 

[mnewxcv]

first you have to remove the splash guard obviously. with that off, I think you have to remove the entire mount to get the assembly out. to do this, there are 2 screws that go into the bumper, one top, one bottom. after disconnecting the wiring and the 2 screws, it should just fall off. to get the light itself out of the mount, remove the adjustment screw and spring. the light is now held in place only by the 2 tabs on the light that go into the 2 holes in the mount. pop those out one at a time and remove light from front of mount.

at least thats how the svts are...