• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

rear sway bar bolt sizes

M

Matt R

Hard-core CEG'er
Moderator
Joined
Jun 6, 2004
Messages
2,786
Location
Plattsburgh, NY
Rust really took it's toll on the underside of the car. So I need to replace the bolts/nuts holding the rear sway bar to the end links, and the bolt holding the sway bar bushing to the subframe. Need the sizes on those, so it'll be easier to get the bolt first instead of taking it off and walking to the hardware store.
 
I would also like to know this. I guess you could drive to the parts store, get under the car, remove the bolt, and find out. If you do this, please post the results.:laugh:
 
I was going to park in the garage, pull the bolts out, then ride my bike to a nearby hardware store. The bolts are so badly rusted I may not be able to tell much about it besides the length; assuming I can actually get the bolt out with a damaged bolt remover. If I do, I'll post the results here.
 
Matt R said:
I was going to park in the garage, pull the bolts out, then ride my bike to a nearby hardware store. The bolts are so badly rusted I may not be able to tell much about it besides the length; assuming I can actually get the bolt out with a damaged bolt remover. If I do, I'll post the results here.
Click to expand...

If I beat you to it, I'll post it.
 
You must log in or register to reply here.
Back
Top