Price and part# on syncros?

[ArtSvt]

Ive searched but found nothing on what people pay for syncros.

I just called a local dealership and the guy had trouble on the part#'s and gave me three different parts and prices just for the 3rd gear syncro.
And the price would have added to about $140 for just 3rd! :shocked:

Someone please help me out with a part number(s) and please tell me it shouldn't be that expensive!:help:

 

[KyleQ]

Ikes - I was thinking on having all of my syncros replaced next time the trans comes out....

 

[Red99CSVT]

There's a stickey on SVTPerformance under the Contour SVT section. Thats where I'm probably going to order mine from.

 

[my98SVTturbo]

5th Gear Syncro - YM2Z-7107-EB - $10.03
Syncro - F5RZ-7107-BA - $16.13
Syncro - F5RZ-7107-B - $20.27
Syncro - YS4Z-7107-GA - $18.73
Updated 3rd Gear - 1S4Z-7M163-AA - $36.12
Bearing - F5RZ-7025-A - $23.60
Bearing - F5RZ-7025-BA - $19.44
Bearing - F8RZ-7F431-AA - $13.52
Bearing - F8RZ-7F431-BB - $14.01


here are the numbers...

how much would it cost for the dealer to put in the updated syncros and a flywheel?

 

[ArtSvt]

5th Gear Syncro - YM2Z-7107-EB - $10.03
Syncro - F5RZ-7107-BA - $16.13
Syncro - F5RZ-7107-B - $20.27
Syncro - YS4Z-7107-GA - $18.73
Updated 3rd Gear - 1S4Z-7M163-AA - $36.12
Bearing - F5RZ-7025-A - $23.60
Bearing - F5RZ-7025-BA - $19.44
Bearing - F8RZ-7F431-AA - $13.52
Bearing - F8RZ-7F431-BB - $14.01

This is confusing.. So what syncro is what? What all do i need to fix my 3rd gear grind?

 

[my98SVTturbo]

This is confusing.. So what syncro is what? What all do i need to fix my 3rd gear grind?

idk. its what i found off of SVRT oerformance and wasnt sure either. i would asume the 3rd gear update syncro??. but if i were you id go ahead and replace all of the syncros to save you a head ache for later. becuse ive herd that the 5th gear syncro goes out alot as well.

 

[98TredSVT]

I'd also have them all replaced, but I've never heard of the 5th gear synchro going out, because that is the synchro that gets used the least by far, unless it was a bad design or something.

 

[KyleQ]

My 5th grinds when shifting into gear in excess of 5K RPM. I'm going to have them all replaced when I have my transmission out - or at least 2nd, 3rd, and 5th...

 

[98TredSVT]

How often do you get to 5k in 4th gear? That's like 115mphish.

 

[ArtSvt]

Would it be smarter to buy the syncros at a dealer and then take the tranny to the shop or just have the shop get the parts on their own?

What else should be replaced along with syncros for wear and tear?

Any idea what the labor/parts should cost?

 

[KyleQ]

How often do you get to 5k in 5th gear? That's like 115mphish.

More then I'm willing to say :blackeye:

 

[ArtSvt]

Nobody can help me out here?:shrug:

 

[BAD SVT]

Nobody can help me out here?:shrug:

how about u just add up the price of wotever syncros u're gonna get, call the shop n ask how much for labor with the parts u got? Guaranteed its cheaper than letting them source their own parts.

 

[ArtSvt]

how about u just add up the price of wotever syncros u're gonna get, call the shop n ask how much for labor with the parts u got? Guaranteed its cheaper than letting them source their own parts.

Yeah..sure thing.. just missing the price and part numbers on the parts:help:

 

[BAD SVT]

Yeah..sure thing.. just missing the price and part numbers on the parts:help:

well, here are the part numbers i got. Turns out they've been updated like a million times :shrug:. Here are the updated numbers to the ones that were posted earlier. The guy at the desk didnt get it either, so here goes...

YM2Z-7107-EB $23.17each(u'll need two of these)
6S7Z-7124-D $71.98
F8RZ-7M000-BB $75.10
these are for the third n fourth gear syncros. for some reason the fourth has to be upgraded along with the third. am gonna be updating mine also, so keep posted to this thread. i'll call bill jenkins on monday and post wotever info he gives me.

 

[ArtSvt]

Thanks for getting thoses numbers.. but what exactly is each one?

Also can you get the numbers on the other syncros as well?

What else should get replaced just for normal wear and tear? Shift Forks? Bearings?

 

[BAD SVT]

Thanks for getting thoses numbers.. but what exactly is each one?

thats the info i dont have yet. The guy @ ford couldn't tell me. Am waiting till monday to talk to bill.

Also can you get the numbers on the other syncros as well?

Theres only one part number for 1st and 2nd gear syncros. Same for 5th and R.
1st n 2nd#- 6S7Z-7124E
5th n R#- 6S7Z-7124

What else should get replaced just for normal wear and tear? Shift Forks? Bearings?

if they'e not worn, new ones shouldn't make a difference.

 

[ArtSvt]

if they'e not worn, new ones shouldn't make a difference.

Well Id rather replace it all now, than have another problem a couple weeks after I put it back together...:shrug:

 

[ArtSvt]

after searching a while I found this.. (Exel File)

http://www.rumodded.com/warmonger/mtx-75 mods/MTX75Components.xls

hope this helps out others and maybe someone can put this file in a sticky?:shrug:

 

[BAD SVT]

after searching a while I found this.. (Exel File)

http://www.rumodded.com/warmonger/mtx-75 mods/MTX75Components.xls

hope this helps out others and maybe someone can put this file in a sticky?:shrug:

dang it! i don't have excel, so i can't see jack.