KingpinSVT
Hard-core CEG'er
Ask him how his ordeal with HIDtech went, and then ask him where to go
OK, now we need to know what happened. Please share, PM if ya want.
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
passport SR7 and other pics
- Thread starter RandyCSVT
- Start date
OK, now we need to know what happened. Please share, PM if ya want.
So, can I get that discount too? Hook it up man!!because it cost me $500 instead of $1500 with my discount. Only $200 more than a passport 8500 X50, and it detects radar and shifts laser signals.
I would've done the same thing :laugh:because it cost me $500 instead of $1500 with my discount. Only $200 more than a passport 8500 X50, and it detects radar and shifts laser signals.
I have the X50 and it performs well, but not well enough for me to wonder how anyone gets by with anything less :shrug:
OK, now we need to know what happened. Please share, PM if ya want.
Ill let Goonz explain, im sure he has no problem doing it.
RandyCSVT
Hard-core CEG'er
So, can I get that discount too? Hook it up man!!
I can only buy one of each model per calendar year. I can still get the regular SR7 (works the same as a passport X50, but no laser shifting like mine).
Goonz SVT
Hard-core CEG'er
OK, now we need to know what happened. Please share, PM if ya want.
well ever since i had got the retrofitt done, somthing just didnt feel right. From day one the passenger side was leaking while the driver side was sealed shut. I tried myself to seal it by finding the bad spot but was unable to do so. SZ came along and I was like whatev I'll deal with it later. I dealt with it too long and finally in august i contacted hidtech again complaining about the leakage. Also at the time because it was hot, the silicone holding my projector onto the reflector was giving way thus making my projectors lose and slightly jitter on bumps. And then in the end the weight of the projector snapped the brittle adjusting mechanism so then I couldnt adjust my projectors and the whole aim went outa whack. I contacted them about that and sent the lights back. Its been 2 months, with the first month they were in contact with me and then this past month they stopped replying to my e-mails. I was shocked because hidtech ALWAYS replied to my emails, even when i had my lights they would follow up on me. I was begining to get scared and sent them countless emails, they just recently emailed me this past friday apologizing for the delay and saying my lights were going out this past monday. At this point i really dont care if they fixed it or not, i just want them back. Pretty much the downfall of this project was that hidtech failed to use proper adjusting brackets, meaning drilling a 3" hole on the reflector and siliconing a projector IS NOT the way to mount projectors. Alex's (pudmunkies) methood of fabricating a custom bracket so that the projector is adjustable along with properly mounted is the way to go. Thats where my projectors fail. The light out put however is still the same..Now im dying to get my headlights back, i cant stand stock halogen lighting
KingpinSVT
Hard-core CEG'er
Yikes. I meant to send you a PM about that, I guess I forgot.
Sorry about the hijack.
Sorry about the hijack.