Aussie Ford
Hard-core CEG'er
I have acquired rear disc's from a 96 LX / 2.5, and plan on replacing my rear drums.
The parts so far:
rear park brake cables
rear hubs and knuckles
rear rotors
rear calipers
In looking at some previous posts on this project there was discussion on restrictor valves. Do these need to be changes also and if so whare are they located.
I should add that the donor car had ABS, my 95 /2.0 does not, so if there is a different restrictor valve(s) needed I'd guess that I'll have to find it someplace else. If that is the case would a couger be a donor for them?
Next question is there any difference between 2.5 & 2.0 front brakes (other than SVT's of course) ?
Thanks for your input
The parts so far:
rear park brake cables
rear hubs and knuckles
rear rotors
rear calipers
In looking at some previous posts on this project there was discussion on restrictor valves. Do these need to be changes also and if so whare are they located.
I should add that the donor car had ABS, my 95 /2.0 does not, so if there is a different restrictor valve(s) needed I'd guess that I'll have to find it someplace else. If that is the case would a couger be a donor for them?
Next question is there any difference between 2.5 & 2.0 front brakes (other than SVT's of course) ?
Thanks for your input