• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

ok wtf

S

SVTJON87

Hard-core CEG'er
Joined
May 29, 2006
Messages
3,682
Location
Glen Ellyn, IL
the Brights indicator light on the dash flashes when I'm on a hill or the car is on 2 jack stands. sitting on a hill and driving on one. then i get home and was pushing buttons on my HU ( pioneer) and the lights go out on it. then come back on. can anyone help me out here? i have the fog light mod and DRL's.
 
SVTJON87 said:
the Brights indicator light on the dash flashes when I'm on a hill or the car is on 2 jack stands. sitting on a hill and driving on one. then i get home and was pushing buttons on my HU ( pioneer) and the lights go out on it. then come back on. can anyone help me out here? i have the fog light mod and DRL's.
Click to expand...

Check your wiring for your for light mod, make sure your connections are secure and not touching other connections, check your radio connections and make sure they are good as well. Hope your things are properly wired and crimped and not just taped together..... good luck with that one... it's one of those you kinda have to be there to fix things...
 
the only wires crimped are the amp bypass wires. and the fog light mod is soldered and taped. but yea i think the wire for the HU illumination is just lose on the connector. the flashing bight indicator is whats bugging me. it flashes 3 times then stops. but i dont think the bight bulbs them selfs are flashing.
 
One of your high beam bulbs are about to go (or the wiring or connector is faulty). If you have DRL, when the high beam bulb is burnt out, the High Beam indicator flashes.
 
High beam indicator flashes

High beam indicator flashes

Now that is a new piece of information from Tony:cool: !
 
Try wiggle test of the relays, maybe poor socket or wiring as well (under the power distribution block).
 
You must log in or register to reply here.
Back
Top