• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

NPG install instructions

2kSVT

CEG'er
Joined
Mar 8, 2003
Messages
324
Location
Dayton,Oh.
Does anyone have the install instructions for the Nautillus kit? If so, could they be stickied here with the ADC/Vortech instructions? If you have them could you pm me for an email address?

Thanks in advance.

Rod
 
Jim,
I got them from SHOgoFast. I read over them last night. They helped me alot with some unanswered questions. There are pictures in the instructions which help greatly. The only thing I would add is more detailed pictures of the vacuum options. In the instructions Joey gets it from one of the 2 tubes going into the UIM. I know there are more options, that give a cleaner overall appearance. There is also a copper pipe that I have no idea where it goes. Luckily Rawburt is coming down for the final install. Also some directions for the XCAL. Mine is ready for final install. I will say I will never do headers again..with the motor in the car. If Joey has no objections I'll email you the instructions to sticky.

Rod
 
Jim,
I got them from SHOgoFast. I read over them last night. They helped me alot with some unanswered questions. There are pictures in the instructions which help greatly. The only thing I would add is more detailed pictures of the vacuum options. In the instructions Joey gets it from one of the 2 tubes going into the UIM. I know there are more options, that give a cleaner overall appearance. There is also a copper pipe that I have no idea where it goes. Luckily Rawburt is coming down for the final install. Also some directions for the XCAL. Mine is ready for final install. I will say I will never do headers again..with the motor in the car. If Joey has no objections I'll email you the instructions to sticky.

Rod

there really arent that many options for vacuum routing. the hose that goes to the wastegate will be considerably larger than the other hard vacuum lines. the easiest place to tap it would be one of those two bigger UIM hoses where a vacuum 'T' connector can be used. if u do it right, it wont look bad. am sure Rawb will take care of that 4 u.
 
there are some good diagrams out on the web and if you search for past build threads there are pictures in them ...
 
If someone will send me the instructions, or whatever, I will host it and sticky it, (WITH Joey's permission, of course)
 
Back
Top