No start

[DaSnoBordr]

So i recently am doing a torsen swap and put it all back in the car to do a dry run just to hear the car again. the car will not start. there is no spark and the injectors are not firing. it just sits and cranks. the CEL turns on with the key on but there are no codes. checked any and all fuses and relays i could check. dunno what else to do. need help

btw the fuel pump works and it builds pressure

 

[Tony2005]

Check all the grounds. The is one for the Ignition coil, one which goes under the battery tray, etc....

 

[AliasJerk]

I agree with Tony, sounds like the ground strap that goes to the ignition coil isnt connected.

Also check to see if you have your ground strap connected from the firewall to the engine mount.

 

[BrApple]

check the three connectors on the passanger side rear valve cover are seated all the way.

 

[DaSnoBordr]

check the three connectors on the passanger side rear valve cover are seated all the way.

lol i feel like an idiot now. i unplugged all 3 of them and it now works perfect. thank you