2slowtour
CEG'er
i did alot of reading and im kinda confused on what i need to get to get my 3L together. i wanna go with the svt UIM and LIM .
as for what i found that i need
2001 3L with S Vin
fill in coolant line in 3L block
svt heads and cames
ST220 valve springs (if wanted)
tranny work ect.
chip from arizonadynochip
good tune
19lb injectors
now what im confussed on do i have to do a split port to match the svt LIM .
i know this has been gone over thousands of times but im read most of it on the old forum and so links work and some dont. if any of you can give me any info i would be greatly thankful.
best regards to all
phil
as for what i found that i need
2001 3L with S Vin
fill in coolant line in 3L block
svt heads and cames
ST220 valve springs (if wanted)
tranny work ect.
chip from arizonadynochip
good tune
19lb injectors
now what im confussed on do i have to do a split port to match the svt LIM .
i know this has been gone over thousands of times but im read most of it on the old forum and so links work and some dont. if any of you can give me any info i would be greatly thankful.
best regards to all
phil