name that sensor

[eepals]

McMaster-Carr sells them, 3/8'" male pipe to 1/4'' female pipe reducer They aren't as long as the stock Ford reducer, but should work.

http://www.contour.org/ubbthreads/s...er=578318&page=0&view=collapsed&sb=5&o=7&vc=1
Scroll down to the third picture. I wrongly stated it was two reducing bushings at the time, but it is just one.

 

[95ContourSe]

McMaster-Carr sells them, 3/8'" male pipe to 1/4'' female pipe reducer They aren't as long as the stock Ford reducer, but should work.

http://www.contour.org/ubbthreads/s...er=578318&page=0&view=collapsed&sb=5&o=7&vc=1
Scroll down to the third picture. I wrongly stated it was two reducing bushings at the time, but it is just one.

Sorry bro, reducer u are talking about is it for the knock sensor or is it for the part that oil pressure sensor.

I finally was able to find what the part number for the oil pressure sensor adapter would be and I also got the dimensions for it.

So ford calls the part as cylinder block adapter and the part number for it is
f8dz6n071aa...dimensions 3/8-18 to 1/4-18... Unfortunately ford discontinued the part at 2005 and by doing so ford turn my life in to hell...

 

[OB1]

I think you are making this harder than it is. STOP looking for a ford reducer & go to a supply store like lowes/home depot & go to the piping/conduit section & get one of those guys in the funny shirts to help you. They do have them I just got finished adding an aftermarket oil sending unit & it came w/ one also (it came from summit BTW). If you get done w/ all of that & you still cant find one shoot me a pm.

 

[eepals]

Sorry bro, reducer u are talking about is it for the knock sensor or is it for the part that oil pressure sensor.
..dimensions 3/8-18 to 1/4-18...

That blurry image is a picture of the reducer with the oil pressure swich installed.

The dimensions you give are for a 3/8 and 1/4 "pipe" thread which is a tapered thread not straight.

Just ask for a 3/8" male to 1/4" female pipe reducing bushing.