BigBEN
Hard-core CEG'er
Here is the information from the other Sucessful Group Buy.
I am doing another interest check to see if I can have enough interest to make another set of replacement plates!
Copied from the other Thread:....
This part is a Plate that replaces the rear Ford Emblem and gives you a flat surface to relocate your SVT Emblem there. (SVT Emblem Not Included) This allows you to Place your SVT Emblem where the Ford Emblem goes and give in a sense, debadge the car at the same time. You will need this part if you want to replace your Ford Emblem with your SVT Emblem so the SVT Emblem sits flat. By just painting over the ford Emblem and sticking the SVT emblem on, the top and bottom the emblem do not touch and leave a nasty looking gap.
Just remove the ford emblem and glue this part in place.
***SVT Emblem NOT included***
The part has been cut from Aluminum. It was cut from a CNC machine so it fits in the place of the ford emblem EXACTLY!
PRICE: $20 shipped
You can not buy this part anywhere and it will cost much more than $20 to get one custom made in this quality.
Picture of what it looks like painted. T-Red
(Pictures Courtesy of Reebs)
What you Get:
One Plate to replace ford emblem with a light matte finish. The part has been smoothed out by hand already and will require a light sanding before painting if that is what you desire. From the light matte Finish, you will have no problem polishing the emblem if you want as well.
Picture of the plate WITH OUT the Light Matte Finish
Picture of the plate WITH the Light Matte Finish
INTERESTED LIST:
--------------------------------
1.
2.
3.
4.
5.
I am doing another interest check to see if I can have enough interest to make another set of replacement plates!
Copied from the other Thread:....
This part is a Plate that replaces the rear Ford Emblem and gives you a flat surface to relocate your SVT Emblem there. (SVT Emblem Not Included) This allows you to Place your SVT Emblem where the Ford Emblem goes and give in a sense, debadge the car at the same time. You will need this part if you want to replace your Ford Emblem with your SVT Emblem so the SVT Emblem sits flat. By just painting over the ford Emblem and sticking the SVT emblem on, the top and bottom the emblem do not touch and leave a nasty looking gap.
Just remove the ford emblem and glue this part in place.
***SVT Emblem NOT included***
The part has been cut from Aluminum. It was cut from a CNC machine so it fits in the place of the ford emblem EXACTLY!
PRICE: $20 shipped
You can not buy this part anywhere and it will cost much more than $20 to get one custom made in this quality.
Picture of what it looks like painted. T-Red
(Pictures Courtesy of Reebs)
What you Get:
One Plate to replace ford emblem with a light matte finish. The part has been smoothed out by hand already and will require a light sanding before painting if that is what you desire. From the light matte Finish, you will have no problem polishing the emblem if you want as well.
Picture of the plate WITH OUT the Light Matte Finish
Picture of the plate WITH the Light Matte Finish
INTERESTED LIST:
--------------------------------
1.
2.
3.
4.
5.