Brent372
Official SE Event Coordinator
I just picked up a 98 Zetec.
It only had a speedo in the instrument cluster, and I wanted a tach.
So, off to the junkyard I went.
I found one i decent shape.
After I swapped it out, the tach works great !!!
But my fuel and temp gauges don't like to move at all.
The speedo / odometer is off by about a factor of 2.8 (1 real mile = 2.8 on the odometer and doing about 50mph has my speedo pegged past 130 mph.
Also, the speedo doesn't move smoothly, instead it "jumps" in 5 mph increments.
Any help anybody could offer would be great.
It only had a speedo in the instrument cluster, and I wanted a tach.
So, off to the junkyard I went.
I found one i decent shape.
After I swapped it out, the tach works great !!!
But my fuel and temp gauges don't like to move at all.
The speedo / odometer is off by about a factor of 2.8 (1 real mile = 2.8 on the odometer and doing about 50mph has my speedo pegged past 130 mph.
Also, the speedo doesn't move smoothly, instead it "jumps" in 5 mph increments.
Any help anybody could offer would be great.