GB: Roush 21mm rear sway bars

[SoopaCooga]

On behalf of ReadyParts, I'm running a group buy on Roush sway bars. There are only a dozen bars left in stock! :shocked: These solid bars are 5mm thicker than non-SVT and 3mm thicker than SVT. As such, they reduce under-steer, allowing you to take turns faster.

The bars are painted Ford blue and ship with new urethane bushings. (If you just want new bushings for your sway bar, you can get them through BAT.)

These bars normally go for over $125. As part of this group buy, each bar is 20% off! That's just $100 before shipping. Bars will be shipped the week between Christmas and New Year's Eve.

EDIT:
This GB was also posted over at NECO, and the list got full quite quickly. Here is the list in order of responses posted. If people back out or if more bars are found, they will go to the next person in the queue.

Looks like there's enough interest to do a GB on 21mm sway bars from BAT, if someone is so inclined.

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer99
5.handyandy
6.02AlaskanCougar
7.PwnSauce
8.99cougarsupreme
9.DesertNeco
10.Shattastic SVT
11.Black98CSVT
12.cvsmightymouse
13.KyleQ

 

[yamaha racer 686]

1.yamaha racer 686
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

 

[my98SVTturbo]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

 

[rollinstylee]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.
5.
6.
7.
8.
9.
10.
11.
12.

 

[SoopaCooga]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer
5.handyandy
6.
7.
8.
9.
10.
11.
12.

 

[Schattastic SVT]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer
5.handyandy
6.Schattastic SVT
7.
8.
9.
10.
11.
12.

 

[CSVT1214]

I have one of these Roush bars from ReadyParts and they are awesome quality. I recommend it to anyone considering the upgrade.

Remember to reinforce your subframes at the same time, otherwise it's just a matter of time before it snaps.

 

[Smalls]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer
5.handyandy
6.Schattastic SVT
7.Black 98 CSVT
8.
9.
10.
11.
12.

 

[Stazi]

IIRC SVT rear Sway bar is 19mm, so 21mm is an approximate 35% increase in torsional stiffness.

 

[KyleQ]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer
5.handyandy
6.Schattastic SVT
7.Black 98 CSVT
8.KyleQ depending on when money is needed
9.
10.
11.
12.

 

[my_black99svt]

stiffness is based on the 4th power of diameter

21 is 50% stiffer than a 19 if they are both solid.

 

[Stazi]

stiffness is based on the 4th power of diameter

21 is 50% stiffer than a 19 if they are both solid.

You are correct - it's been a while. :troutslap:

~49% stiffer assuming the same material.

 

[Project SVT]

sounds nice. if you don't get 12 i'll buy one just because

 

[Smalls]

pretty sure he'll get 12. this is posted on neco as well

 

[Beans]

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer
5.handyandy
6.Schattastic SVT
7.Black 98 CSVT
8.KyleQ depending on when money is needed
9.Beans wants one
10.
11.
12.

 

[SoopaCooga]

Sorry, Beans. You're on the waiting list. This was posted on NECO as well.

1.yamaha racer 686
2.my98svtturbo depending on money situation
3.rollinstylee
4.wadespencer99
5.handyandy
6.02AlaskanCougar
7.PwnSauce
8.99cougarsupreme
9.DesertNeco
10.Shattastic SVT
11.Black98CSVT
12.cvsmightymouse
13.KyleQ

 

[biminiLX]

I would like to be put on the waiting list, serious buyer if you have one left.
Thanks, J

 

[Smalls]

phew! just made the list!

 

[KyleQ]

Whoa - I got bumped down to last - that is odd..

 

[my98SVTturbo]

Are these the same ROSUH sway bars that were used on the ROSUH Bob Boudurant CSVT's? When you talk about reenforcing the rear sub frane. what all do you need? just the parts listed on the BAT site or what?