fatmat?

[Matt R]

wow that's not bad at all.. I thought it would take even longer to do floor and stuff.

i'll be doing my doors and everything else later this week with raam. we'll see how it goes

Get some PB blaster on the bolts holding the seats in now. Snapped the head off one on each side. And I removed these about 2 years ago... the first time they were worse.

I failed to mention, it was about 4 hours to do, not counting removing the interior. Leave probably another hour for that. Take advantage of the carpet being out though... peel off the jute, and scrub the carpet down with some water or a pressure washer. You can get it super clean, and it only takes about a day to dry.

 

[96RedSE5Sp]

How do you do the doors in dynamat? How do you get the stuff in there without it interfering with the window? Is there a "how to" on this?

 

[CSVT_2004]

How do you do the doors in dynamat? How do you get the stuff in there without it interfering with the window? Is there a "how to" on this?

You just use a roller and apply it to the door... should be pretty straight forward...

 

[Berkel]

How do you do the doors in dynamat? How do you get the stuff in there without it interfering with the window? Is there a "how to" on this?

the window goes down in between both panels. deadener is skinny enough to clear on either panel