Ok im having a little problem getting the drivers window to go down. Here are the things ive noticed. It stopped working about 3 months ago, the relay seems to make a little click when the drivers window switch is pushed, but there is no noise when the other windows ( which work ) switch is pushed. I took a hammer and hit the window motor but that didn't seem to do anything, the window motor does get hot after testing the switch for awhile. I did check the connections everything looked good as far as i could see. Any info would be helpful. Does it seem like the motor is bad????? thanks the window is stuck in the up position
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
Drivers side Window wont go down
- Thread starter Bruce_SVT
- Start date
Smalls
Addicted CEG'er
:help: they made hammers for hitting nails into wood. not for fixing window motors. first things first. your problem isnt a relay if the other windows work. the relay will always click when you turn it on. thats how relays work. chances are, its a bad motor. thats what i'm leaning to after reading your description of the problem. i have an extra one if you want it.
Last edited:
.blackcontour0580
CEG'er
- Joined
- Feb 10, 2007
- Messages
- 84
its a bad window motor for sure mine does that also
loggerbomb
Hard-core CEG'er
My window wouldnt go down for a few months, but since it was late fall I didn't mind and one day, just like magic it started working again. Figures it was right when I went to buy a new motor!
. Thanks.