• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Battery Tie Down Group Buy ( Gauging Interest )

S

Smokeshow

CEG'er
Joined
Jan 16, 2003
Messages
349
Location
Tpa, FL
Looking to see who all is interested and which design you are interested in.

IMG_0660_zps1a62b489.jpg


Version one. SVT Tie Down
IMG_0650_zps8f4a6afd.jpg


Version two. Mirko Revisioned Blank
IMG_0665_zps9647ea50.jpg


Version three. SVT Mirko Revisioned
IMG_0666_zps1cd7e862.jpg


There is a fourth design. Its just a blank. The same thing as SVT Tie Down, minus the SVT.

http://www.contour.org/ceg-vb/showthread.php?79665-Billet-Battery-Tie-Down...

Please reply your with your version or versions you would like and how many if any. Price may lower slightly if the quantity warrants it. But the initial cost to to make these is a good bit more than I accounted for. But I posted a price a while back and I will stand by it. $35. At this point and time I have not "tied down" a powdercoater. If you are interested in this process let me know. I am only possibly offering black as an option. I will need a decent quantity to make it affordable. So anyone wanting a special color other than black. I would suggest that you look into a local powdercoater, to lower your cost. Also, I can do a completely custom design if that is something you desire. I have had a few requests for that. Just be prepared to pay for the drawing fee $25 for most designs or lettering. I.e. Solo92s10 or Maddog.

Price is $35 plus shipping. So if you want it shipped to Nigeria, that is fine with me, but you are going to pay for it. We need a minimum of 10 to start the gb. Putting a cap on this at 30.




1. Adam102487 - V3 - 1 - pc - paid/shipped
2. Solo92s10 - V3 - 1 - paid/shipped
3. bigboyricky93 - V3 - 1 - paid/shipped
4. jsujo - V3 - 1
5. qbcsvt - V3 - 1
6. Terryford8 - V3 - 1 - paid/shipped
7. Geddup Noise - V3 - 1 - paid/shipped
8. AGrayson84 - V3- 1
9. Thomas LaPrade - V3 - 1
10. zerg1024 - V2 - 1 - paid/shipped
11. Frosty - V3 - 1 - pc - paid/shipped
12. SvtBuckeye11 - V1 - 1 - paid/shipped
13. contourfever87 - V3 - 1 -
14. CA SVT Driver - V3 - 1
15. TgreenTour99 - V3 - 1
16. Eastwood728 - V3 - 1
17. midtnightsvt - V3 - 1
18. my98SVtturbo - V3 - 1 - pc - paid/shipped
19. svtlover - V3- 1 - pc - paid/shipped
20. kujo913 - V3 - 1 - paid/shipped
21. Ramon99svt - V3 - 1 - paid/shipped
22. bostinolin - V3 - 1
23. Bobrules - V2 - 1 - paid/shipped
24. Squeek - V3 - 1 - paid/shipped
25. flip4eva83 - V3 - 1 - paid/shipped
26.
27.

PayPal is...
Smokeshow00@hotmail.com
 
Last edited:
You don't have a powdercoater picked? Hmmmm :ponder:

I could easily do these for you.


What are you doing with the cut edge of these? Sanding, polishing, or? Plasma cut aluminum edges are serraded and very rough, are you using a laser cutting machine?
 
Waterjet. And the edge shouldn't require much finishing. But yes a plasma cutter has a large kerf. Laser would be perfect. But I don't have access to one that I can run myself.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
And the powdercoater? I can coat these all semi-gloss black for you in one batch.
 
Just so we are clear, you want it to say roush, not the symbol.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Version 3! Because it's lighter, so my car will be faster!!!!!!

In all seriousness, I'll definitely be interested in a #3. Looks great!
 
You must log in or register to reply here.
Back
Top