281Thunder
Veteran CEG'er
I just have the remote bass knob that came with my basslink. You can see where it's mounted in the pic, just below the shifter.
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
bass control knob?
- Thread starter Mywhip
- Start date
COLER59
CEG'er
its A Time Waster To Go Through The Menu And Go To The Bass Control, Just For A Couple Songs.
I Have To Fix My Other Problem Now Though, Which Is Why My Amp Is Cutting On And Off.
Could Be The Way You Have You Subs Hooked Up..if Your Bridging Them Check To See What Ohms Your Putting To The Amp..if You Bridging 2 Dual Voice Coil Sub Then It Will Put To A 1 Ohm Load And Some Lower Quality Amps Wont Run For Long At 1 Ohm..you Might Have To Run The Subs Single Voice Coil...if You Have Any Questions Pm Me Im Very Good At This Kind Of Stuff...
Could Be The Way You Have You Subs Hooked Up..if Your Bridging Them Check To See What Ohms Your Putting To The Amp..if You Bridging 2 Dual Voice Coil Sub Then It Will Put To A 1 Ohm Load And Some Lower Quality Amps Wont Run For Long At 1 Ohm..you Might Have To Run The Subs Single Voice Coil...if You Have Any Questions Pm Me Im Very Good At This Kind Of Stuff...
You do know every first letter of a word doesn't need to be capitalized, right?
I just have the remote bass knob that came with my basslink. You can see where it's mounted in the pic, just below the shifter.
If i have mine, ill put it where i have my shut off switch right now. But i need to find out if i can have the cut off switch, along with the knob first.
Could Be The Way You Have You Subs Hooked Up..if Your Bridging Them Check To See What Ohms Your Putting To The Amp..if You Bridging 2 Dual Voice Coil Sub Then It Will Put To A 1 Ohm Load And Some Lower Quality Amps Wont Run For Long At 1 Ohm..you Might Have To Run The Subs Single Voice Coil...if You Have Any Questions Pm Me Im Very Good At This Kind Of Stuff...
I think the amp was running to high. I turned down the controls on the amp, and it doesn't cut out now.
You do know every first letter of a word doesn't need to be capitalized, right?
Nor does posting stuff that is not related to the topic.
Dyoel182
Addicted CEG'er
I think the amp was running to high. I turned down the controls on the amp, and it doesn't cut out now.
Running too high?
Running too high?
It is only 600 watts and the subs are 1k watts..does that come into a problem?
I turned down some of the settings on it and it has been fine since then..
TUFTOUR
Hard-core CEG'er
Running too high?
probably the gain :shrug:
probably the gain :shrug:
i adjusted all three, and no more problems ^.^
Nor does posting stuff that is not related to the topic.
i shouldn't capitalize non-relevant info? okay, when my items do not add to the thread i'll use all lower case...