• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Aircougar Performance - Powdercoating and Automotive repair/modification

Status
Not open for further replies.
OH hell, ------> run for my money :eek:. Good luck guys. Looks like a one stop shop there.
 
3L Swap and Powdercoated Valve Covers! 1999 BLK MNB 0532

3-18-08EngineBayPics007.jpg

1-13-083LSwap046.jpg

3L Swaps for both of these SVTS (0532, 0889)
TSTractionDesktop1.jpg



I can vouch for all of them, that their services are great and will be used within the next 2-3 months again!

Good Luck w/ everything Aircougar Performance!
 
IMG_1256.jpg


Suspension Work
Brake work
Mirko Installation
Troubleshooting
and more to come!

Great work here. glad to see you guys got somethin good goin here :cool:
 
95pgt-t said:
so if we wanted a 3l swap can you guys get the engines too?
Click to expand...


typically the person requesting the service would source their own parts.
We can assist in locating and getting the parts. however if we are to purchase said parts money for the parts would be due up front so that we can purchase the parts.

do note that the prices for 3L engine installs are for labor only unless noted otherwise. (ie npg fuel line adaptor or Bugzuki plates)
 
Last edited:
We are looking to make up different packages or bundles where services can be combined at a discount.

example: need a wheel bearing replaced? want to powdercoat the knuckles on your car? Let us know and we will bundle the services.

example: want powder coated valve covers but don't feel confident or comfortable enough to attempt installing them yourself? we can bundle the powdercoating with the cost of installation of the valve covers.

be creative and let us know by pm what you would like done and we can work something out.
 
Last edited:
hmouta said:
how about custom exhausts and pipe bending/welding?
Click to expand...


welding yes. aircougar can weld and does have a welder.

installation of say a trubendz exhaust or some other pre-made exhaust system, not a problem.

fabrication of exhaust from scratch or just straight pipe, not as of this time. down the road if things work out and really take off a pipe bender would be one of those tools that we would love to have so we can make custom exhaust systems.

if you would like us to build an exhaust system using pre-bent pipe section then I am sure we can work that out.

Please pm with more specifics if you have something in mind and we can work something out!
 
Sounds like you guys are offering a great service with good prices. I wish I was closer. Good luck to you guys:cool:
 
BrApple said:
we have CEG members that come up from NJ for work.
Click to expand...

ME ME ME ME...

You should see the stares I get when I tell people, My Mechanic is in MASS. :eek::eek::eek::eek::eek:!!!!!!

WHAT?

Well worth it and going to be there in exactly a month again to spend some more money! It is a place to get things right by completely experienced and knowledgeable people. Gotta get things right sometimes or after messing things up you have to make things right! Our Drive is 4 Hours and well worth it every single time all of my buds SVTs get on the highway...

And on the way back when your newly Aircougar Performance installed parts... All you can do is mash the pedal and :drool::drool::drool::drool:!

I should be your Mascot???

- amyn
 
wow 750 for a 3l install.....and i thought the people closer to me were offering a great deal:shrug:

Good for you guys...doing this for everyone!!!
 
Thanks to Greg and Brian at Aircougar for your help today. i was stuck in traffic in albany on the way back. i got a real good feel for the shifts and its a lot better. but i know i will be needing a clutch soonish(end of summer maybe) and ill probly end up changing the cables at that time. There is no doubt i will be back considering the great prices and the great knowldge you guys have.
 
Status
Not open for further replies.
Back
Top