• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

No clicky...No Nothing

i had this exact problem. for a week straight i traced it to the one way diode in the engine fuse block. its the little black looking fuse. i dismantled my fuse block from another car and put it in mine and when i did that i must have dropped one of the pins in the block. the whole inside is male and female connectors. well the one for the one-way diode dropped down and didnt make a connection. if there is no power going past this the car wont start it wont even crank, sounds like the same thing to me. either the diode is blown or if the new wiring harness is from a junk yard maybe someone messed with the block before you got it.
 
I'll try and switch that diode out, I have a extra fuse block. I am also going to try and run the wire like the dealership did, so Ill let you all now later what happened. Thanks for all the help.
 
Problem fixed, I just had to bypass the pcm like ford did on my other car, duh should have did this first what was I thinking. Anyways thanks for all the help. Mods you can lock this up.
 
What ford did was take the black/grn wire and run it directly from the mlps sensor to the yellow/grn wire on the square connector at the drivers side strut tower. I am not sure what that does so I wouldnt recommend doing it until you find out what it does. I was just coping what ford did.
 
Back
Top