montrese04
Veteran CEG'er
ok this is my setup at the moment. i know y'all like information so you don't haft to go thru the internet. so i think this is all of it. Apologies if it's overboard on the amp info :crazy:
also wanted to know is my amp designed to hook up my door speakers and my sub
and if my setup is nice then please let me know cuz i'm completely ignorant of car audio. I just know how to hook it up. I dont understand all the numbers
also wanted to know is my amp designed to hook up my door speakers and my sub
and if my setup is nice then please let me know cuz i'm completely ignorant of car audio. I just know how to hook it up. I dont understand all the numbers
- head unit alpine cda-7863 internal amp 60x4
- stock door speakers:nonono:
- pioneer premier TSW126dvc 1000w max/400w nom, 4ohms, 83oz dual mass magnet in a ported box (3x1x1) i guess
- rockford fostgate 1 farad capacitor
- Duralast in engine bay and duralast gold in trunk
- amp is phoenix gold zx600ti Continuous Output Power at 1% THD (Wrms):
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) 75 x 2
Into 4 ohms Stereo @ 14.4 Vdc 150 x 2
Into 2 ohms Stereo @ 14.4 Vdc 300 x 2
Into 4 ohms Bridged @ 14.4 Vdc 600 x 1
Minimum Speaker Load, Bridged 2 ohms
Minimum Speaker Load, Stereo 1 ohm
Recommended Fuse Size, Stereo 4 ohms / Stereo 2 ohms / Bridged 60 / 80 / 80 amp
Continuous Current Draw @ Full Power * 60 amps
Peak Current Draw @ Full Power ** 85 amps Total Harmonic Distortion < 0.02 %
Signal to Noise Ratio (A-weighted) > 100 dB
Frequency Response +/- 1 dB, 20 Hz to 20 kHz
Bass Boost 0 to +18 dB @ 45 Hz
Crossover Frequency Range 40 Hz to 800 Hz
Crossover Slope 24 dB per octave
Input Sensitivity 200 millivolts to 6 volts
Input Impedance > 30 kohms
Input Voltage Range 0.2 volts to 6 volts
Power Supply Operating Range 10.5 Vdc to 15.5 Vdc
Typical current draw at idle