• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

New over here... checking interest in custom HID Retrofit Projector Headlights

More of my work!

sn95-12.jpg


sn95-13.jpg


sn95-14.jpg


sn95-15.jpg


Smoked sn95 lights

2012-03-15_18-18-37_288.jpg


2012-03-15_18-18-22_509.jpg


2012-03-15_18-16-35_67.jpg


another black 03 set, clear lens this time

2012-03-22_06-47-44_174.jpg


2012-03-22_06-47-52_367.jpg


2012-03-22_06-48-28_487.jpg
 
That is actually not me.... Customer supplied pics of lights installed. I will assume and hope that gentleman has jack stands under there.
 
With some flash.
2012-04-05_13-59-01_504.jpg


2012-04-05_13-58-48_946.jpg


No flash...

2012-04-05_13-58-39_305.jpg


2012-04-05_13-58-33_231.jpg


Backside... Sealed off the gap with some plumbing goop for a waterproof yet flexible seal, covered that with some black silicone for added protection and to blend it in. Wires have been shrink wrapped and are ready to go.

2012-04-05_13-57-57_598.jpg
 
All I would need it set of lights to get it rolling..

send an email to info@yukeshidretrofits and first set will receive $50 off
 
I am interested in knowing or seeing a set of these projectors. So let me get this straight: we can send you a set of headlights to do the work on and get a discount perhaps? Also, when we get these headlights done from you, all we'd need is our, for example, set of DDM HID's and done or do these require a type of bulb/ballast to work?

Thanks for the answers on this!
 
naujcdl said:
I am interested in knowing or seeing a set of these projectors. So let me get this straight: we can send you a set of headlights to do the work on and get a discount perhaps? Also, when we get these headlights done from you, all we'd need is our, for example, set of DDM HID's and done or do these require a type of bulb/ballast to work?

Thanks for the answers on this!
Click to expand...

You can send me a set of lights, or I can order new ones for the retrofit, I order all the projector parts etc, do the labor and send them back. First contour set gets a discount. You could use ddm bulbs and ballasts but you would need a different harness from me. I would not swap in those cheap parts though....
 
Havent checked in over here in forever, responded to a few PMs and will post more pics of past projects since the last later tonight
 
You must log in or register to reply here.
Back
Top