FavoriteMystaque
Hard-core CEG'er
- Joined
- Oct 16, 2004
- Messages
- 1,192
I am trying to reassemble my fuel pump on my 1998 Mystique, that has the return type pump, 2 plastic snap in 90 degree elbow fittings red and white. After replacing the rusted lock ring , I have the pump in there fine, but can't decide how far down the 90 degree elbow fittings should go in. There is a ridge on the fittings, should it touch the pump sockets or should it be almost 1/4 inch above them, as it is right now? There appears to be stops about 1 1/32 inch down into the pump. It is not leaking in a short test.
Last edited: