shavedsvt
Veteran CEG'er
hey im wiring up my boost controller as i speak. it has 6 wires that i tap into the wiring harness.
red;power
purple;rpm or injector signal(2 different wires i want to monitor injector pulse width so i want the injector signal)
green; ground
black; ground (both need to be on the same wire)
gray; throttle
white; speed signal
any help with finding which wires on the harness and pin location would be helpful
red;power
purple;rpm or injector signal(2 different wires i want to monitor injector pulse width so i want the injector signal)
green; ground
black; ground (both need to be on the same wire)
gray; throttle
white; speed signal
any help with finding which wires on the harness and pin location would be helpful