• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

Aussie Gen 2 Grill Mesh GB

Status
Not open for further replies.
1. Goonz - Full set (will send oval) PAID
2. Shizapooh- DIY - PAID
3. icysvt-DIY (payment sent)
4. pimdpcontour. will send oval and payment no later then the 5th
5. holyrollerzc3 - full set(will send oval)PAID
6. Black 98 Csvt- Full set (will send oval) PAID
7. Clay_SVT-Full Set (Will send oval) PAID
8. LUCA - Full Set- DIY PAID
9. Blast 47 - Full Set -(will send oval) - PAID
10.SweetSVT- Full Set- PAID
11.Trhlz1222-Full Set(will send oval)
12. Cannondalemtb - DIY - PAID
13. Black98csvt- Full Set DIY (PAID by LUCA)
14. OB1 - Full Set DIY - PAID
15.Fordman302-Full Set-Will send Oval.PAID.
 
1. Goonz - Full set (will send oval) PAID
2. Shizapooh- DIY - PAID
3. icysvt-DIY (payment sent)
4. pimdpcontour. paid diy kit.
5. holyrollerzc3 - full set(will send oval)PAID
6. Black 98 Csvt- Full set (will send oval) PAID
7. Clay_SVT-Full Set (Will send oval) PAID
8. LUCA - Full Set- DIY PAID
9. Blast 47 - Full Set -(will send oval) - PAID
10.SweetSVT- Full Set- PAID
11.Trhlz1222-Full Set(will send oval)
12. Cannondalemtb - DIY - PAID
13. Black98csvt- Full Set DIY (PAID by LUCA)
14. OB1 - Full Set DIY - PAID
15.Fordman302-Full Set-Will send Oval.PAID
 
just downloaded that song because of you, man, its been so long since ive heard it
 
Looks like I'll have at least 16 sets out of this first batch. So there's at least one spot left for anyone that is sitting on the fence about getting a kit.

Should have the DIY kits sent out by the end of next week the latest. Also will try and send out the Ovals as quickly as I can too.
 
Stazi said:
Looks like I'll have at least 16 sets out of this first batch. So there's at least one spot left for anyone that is sitting on the fence about getting a kit.
Click to expand...

OK, I guess that's my cue. :)

Will pay pal you this evening or tomorrow morning.
 
Stazi said:
Kits start shipping out today in order of payments received.
Click to expand...

I hope I get mine soon, I hate the look of my car without the grill. Plus my mirko is going in for paint and I was going to toss the oval right with it as well :)

Stazi so how are we going to install the front lower piece along with the back?
 
Goonz SVT said:
Stazi so how are we going to install the front lower piece along with the back?
Click to expand...
Carefully! :troutslap:

The rear is really easy to install it almost falls into place. You may need to trim one or two tabs with the box cutter.

As for the Front lower - it's a little trickier.

I recommend you start from the middle of the bumper, and then move out.

Some tabs will require significant trimming. But that's the nature of the beast when you try to adapt something that wasn't made for application to the bumper. Take your time and don't go crazy hacking and choppoing the mesh and you'll be fine. The should be almost NO reason to cut the mesh, except for maybe on the very edges of the sides. I used my own mesh as a template so I KNOW it fits.
 
can you post whos have been shiped out.? mine will be here tomorrow i can't wait ....... :) add it to list of mods i am doing over the next 2 weeks.
 
Last edited:
an update on whos has shipped would be really helpful actually, i gotta get to the box before my lady!! lol
 
I received shipping notification. Maybe you guys should check your email. I'll be getting mine tomorrow I think.
 
Status
Not open for further replies.
Back
Top