Announcement

Collapse
No announcement yet.

FAQ: 3L Part Numbers

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FAQ: 3L Part Numbers

    Here are some of the part numbers for aftermarket and/or Ford OEM 3L parts.

    If anyone has any corrections or things to add to this post, please do so.

    Please keep other comments and/or questions in other threads please so that this post is just as informational as it can be.

    If you have part numbers, please post them here - 3L build related parts only.

    Note: Prices listed are what have been paid in the past and may not be current with today's pricing at your local parts store.


    Engine:
    Per Bill Jenkins:
    3.0L short block, NEW. Build date is from 04/01/03 and is the same part# for Sable, Taurus, Escape.

    4F1Z-6009-BA List $702.55 Inet $526.91 Core $500.00


    Seals and gaskets:
    - Fel-Pro Part# 61006 SE TB gasket, $1.59
    - Fel-Pro Part# 61006 SVT TB Gasket
    - Fel-Pro Part# 70149 EGR gasket
    - Fel-Pro Part# 9038PT 2.5L Left Hand Head Gasket
    - Fel-Pro Part# 9039PT 2.5L Right Hand Head Gasket
    - Fel-Pro Part# 9540PT 3L Left Hand Head Gasket
    - Fel-Pro Part# 9541PT 3L Right Hand Head Gasket
    - Fel-Pro Part# CS9038 2.5L lower conversion Kit (includes oil pan gasket, oil seals etc.), $72
    - Fel-Pro Part# ES72159 Head bolt set, 2.5L 2 req., $16.92ea
    - Fel-Pro Part# HS9038PT Head gasket set, conversional $231.15
    - Fel-Pro Part# MS92586 3L Plastic Oval Port Intake Manifold Set
    - Fel-Pro Part# MS95715 Exhaust Manifold Gasket (53mm x 32mm)
    - Fel-Pro Part# MS95726 Intake manifold gasket set, $30.15
    - Fel-Pro Part# OS30675R Oil pan set , $35.27
    - Fel-Pro Part# SS72873-1 Valve Stem Seals (Viton)
    - Fel-Pro Part# TCS45966 Camshaft rear seal gasket set, $6.95
    - Fel-Pro Part# TCS45967 Crankshaft front seal, $14.55
    (Includes 2.5L head gaskets that are not needed.)
    - Fel-Pro Part# VS50462 Valve cover set, $32.59

    - BCA part# 3909 Crankshaft oil seal, $13.32
    - BCA part# 5277 Crankshaft oil seal (teflon), $16.76
    - BCA part# 99363 Crankshaft oil seal (redi-sleeve), $33.50
    - BCA part# 88187 Harmonic balancer sleeve, $4.18
    - BCA part# 482041N Oil seal, front timing cover, $7.67
    - BCA part# 99187 Oil seal, front timing cover (redi-sleeve), $22.58
    - Spectra Premium #1719 non-SVT radiator, $138.41


    Clevite 77 bearings:
    - CB-1772P Rod bearing, available in standard, -.25MM, -.50MM, and -.75MM.
    - MS-2207 Mains (not yet available)


    Federal Mogul:
    - 7262M- Standard Grade Main bearings (also available in non standard grade)
    - 6-4395A- standard grade rod bearings (also available in non standard grade)


    Ford part numbers:
    - 2S7Z-6513-AA ST220 Valve Springs (measured 161-163 lb/in)
    - 3F1Z-6564-AA New Roller Finger Followers
    - 3M4Z-6675-BA Upgraded Oil Pan Set
    (2 drain back channels and better lower baffles comes with gasket and hardware)
    - 4F1Z-6065-AA Head Bolts
    - F3LY-6214-A Connecting Rod Bolts, need 12
    - F5AZ-6700-A 3.0 Front Crankshaft Seal
    - F5AZ-6701-A 3.0 Rear Crankshaft Seal
    - F5DZ-9E936-AE SVT TB Gasket
    - F5RZ-2A411-A 2.5L UIM Plastic Retainer Grommet with Brass Insert Sleeve
    - F5RZ-2L181-AA 2.5L UIM Plastic Retainer Grommet
    - F5RZ-6020-A 2.5 Right Front Timing Cover Gasket
    - F5RZ-6020-B 2.5 Center Front Timing Cover Gasket
    - F5RZ-6020-C 2.5 Left Front Timing Cover Gasket
    - F5RZ-6345-C Lower cylinder block retaining bolts, need 4
    - F5RZ-6345-D need 8
    - F5RZ-6345-E need 5
    - F5RZ-6584-B 2.5 Right Valve Cover Gasket
    - F5RZ-6584-C 2.5 Left Valve Cover Gasket
    - F5RZ-9439-B 2.5 Lower Intake Manifold Gasket
    - F5RZ-9H486-BA 2.5 Upper Intake Manifold Gasket
    - F5RZ-17285-AA MTX-75 Speedo Gear
    - F6DZ-6345-CA need 5
    - F6DZ6505A Valve-exhaust
    - F6DZ6507A Valve-intake
    - F6RZ-9K313-BC Fuel vapor hose
    - F7RZ-4211-AC Differential Bearings (2 req)
    - W701-512-S301 TTY Crank Pulley Bolt
    - XF1Z-6051-BA 3.0 Right Head Gasket
    - XF1Z-6051-DA 3.0 Left Head Gasket
    - XS4Z-7201-CD Upgraded Shifter Tower (03+)
    - XS8Z-7230-DD 1-2 Shifter Fork, Roller Bearings (02+)
    - XW4Z-9448-AA Duratec Exhaust Manifold Gasket (50mm x 26mm)
    - YF1Z-6148-BA Piston rings, $30.03 (does 2 pistons)
    - YF1Z-6513-FA Duratec Valve Springs (rated 153 lb/in per manual)
    - YL8Z-6622-BA 01+ Upgraded Oil Pickup (req 01+ main studs)
    - YL8Z-6687-AA 01+ Upgraded Windage Tray (req 01+ main studs)
    - YS2Z-7230-BA 5-R Shifter Fork, Revised (00)
    - YS4Z-7230-AD 3-4 Shifter Fork, Modified Oil Scraper (01+)
    - YS4Z-7K453-FA Shifter Retaining Clip

    Motor mount/Powersteering bracket parts
    (needed for mid '98 and previous years to fit to the 3L block):
    1S7Z3A732AA Bracket, $32.72
    W704693S309 Long Bolts, $5.22 each
    W704694S309 Short Bolts, $3.53 each


    ARP bolts:
    - 253-4701 ARP Head Studs
    - 253-5402 ARP Main stud kit


    K&N Filters:
    K&N Filters
    Tapered Conical - DB x DT x L
    RF-1045 (5.5 x 4 x 8) = 720cfm
    RC-4630 (5.5 x 4.5 x 6.5) = 615cfm
    RE-0950 (6 x 4.625 x 6) = 605cfm
    RE-0920 (6 x 4.625 x 9) = 900cfm
    RU-3530 (5.375 x 4.375 x 7) = 645cfm (3.75" flange)
    Straight Conical - D x L
    RU-1785 (5 x 8.5) = 800cfm


    Miscellaneous parts:
    - Stant Part# 13396 160 Degree T-Stat
    - Bosch# 13246 L1H1 Wideband O2 Sensor


    Tools:
    Rotunda Tool Set - Essential
    T94P-6136-AH Connecting Rod Guides
    T94P-6256-AH Camshaft Seal Protector
    T94P-6256-BH Camshaft Seal Replacer
    T94P-6256-DH Camshaft Damper Replacer
    T94P-6312-AH Water Pump Pulley Remover/Replacer
    T94P-6312-BH Water Inlet Tube Replacer
    T94P-6510-BH Valve Guide Replacer Adapter
    T94P-6510-CH Valve Stem Seal Replacer
    T94P-6256-CH Camshaft Alignment Triming Tool
    T94P-6510-AH Valve Stem Seal Remover
    T94P-6510-DH Valve Guide Replacer Adapter
    T94P-6565-AH Valve Spring Compressor Adapter
    T94P-4451-AH Measuring Fixture
    T94P-4451-BH Differential Shim Selection Tool Adapter
    T94P-7025-BH Multi-Bearing Cup Replacer
    T94P-7025-CH Differential Drive Shaft Seal Replacer
    T94P-7025-DH Selector Shaft Bearing Remover/Replacer
    T94P-7025-EH Pinion Spline Socket
    T94P-7025-FH Gear Lever Aligning Tool
    T94P-7025-GH Differential Bearing Cone Replacer
    T94P-7025-HH Selector Shaft Seal Remover/Replacer
    T94P-2100-AH Sub Frame Alignment Pin Set
    T94P-6000-AH Power Train Alignment Gauge Set
    T94P-70010-AH Transmission Range Sensor Tool
    2005 GTO IBM - 341hp/341tq
    - Volant intake, JBA catless midpipes, H-pipe, GMM ripshifter, BMR skidplate, HIDs, SAP bumper & grilles, CV8-R taillights

    Local CEGers: If you need detailing PM me

  • #2
    I don't know if these can be used or not, but i found a part number for Clevite main bearings for Duratec 3.0. The part number is MS-2207P. Whats the advantage of these? I'm about to do a engine swap and trying to get the best parts for everything

    Comment


    • #3
      Complete 3.0 l engine?

      Does anyone know of a company that sells the 3.0l engine as a crate motor?
      98 Silver Frost SVT
      Painted Calipers
      Yokohama Tires
      The Boxer

      Comment


      • #4
        all I see here is this:

        - F5RZ-6020-A 2.5 Right Front Timing Cover Gasket
        - F5RZ-6020-B 2.5 Center Front Timing Cover Gasket
        - F5RZ-6020-C 2.5 Left Front Timing Cover Gasket

        is that to say the only source for timing cover gaskets is a ford dealer?

        thanks dudes
        Originally posted by Pole120;n1796545
        Find the weak link, make it stronger, find the next one, repeat....

        Comment


        • #5
          Is the 3M4E oil pan the same as the 3M4Z?
          The Ignore list : Giving us the ability to surf CEG while keeping our blood pressure's in check, since 2008...

          Comment


          • #6
            The correct part number for replacement plugs on the ST220/Mondeo intake are as follows:

            Engineering P/N: W528011S1309
            Ford P/N: F5RZ-6026E

            Thanks to CSVT#49
            98 Black CSVT #1244 3L (Sold - seabass 00SVT)
            88 Festiva LX 5 Speed - Go cart (Sold)
            04 Passat B5.5 1.8T - Grocery Getter
            94 Emerald Green SHO MTX (Rot Free) -Daily Drivr

            Comment


            • #7
              Originally posted by pwntbywombat View Post
              The correct part number for replacement plugs on the ST220/Mondeo intake are as follows:

              Engineering P/N: W528011S1309
              Ford P/N: F5RZ-6026E

              Thanks to CSVT#49
              Ah yes you beat me to it. Thanks for putting the info in here... for some reason I was thinking it was locked.

              Also to add to this in the US the part is used as the frost plug on all 2.0L Duratec cylinder heads.
              -Mike
              If you are wondering where the avatar came from look here... Link
              98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
              85 Camaro - 1969 350ci, 503BHP

              Owner - RIES PEFORMANCE

              Comment


              • #8
                Originally posted by GTO Pete View Post
                - 2S7Z-6513-AA ST220 Valve Springs (measured 161-163 lb/in)
                These springs are no longer available under this part number. I received the following message below when trying to order them from Tousley Ford's Trademotion part's website.

                Supersession Information Part number 2S7Z6513AA was superseded by part number 2S7Z6513AC.

                This part number is now shared for the following vehicles...

                Escape, Mariner - 3.0l 2001 - 2007
                Freestyle - 3.0l 2005 - 2007
                Escape, Mariner - 3.0l 2008
                Contour, Mystique - 2.5l 1995 - 2000
                Fusion, Milan - 3.0l 2006 - 2009
                Zephyr - 3.0l 2006
                Sable, Taurus - 3.0l dohc 1996 - 2005
                Five Hundred, Montego - 3.0l 2005 - 2007
                -Mike
                If you are wondering where the avatar came from look here... Link
                98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                85 Camaro - 1969 350ci, 503BHP

                Owner - RIES PEFORMANCE

                Comment


                • #9
                  After market solid copper head gaskets for Ford 3L

                  http://www.scegaskets.com/

                  p/n S91244
                  Solid copper, 4 thou thick
                  3 week lead time
                  price (as of 4/25/11): $194.70/set

                  Solid copper, 6 thou bumps it to $233.65/set
                  -Mike
                  If you are wondering where the avatar came from look here... Link
                  98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                  85 Camaro - 1969 350ci, 503BHP

                  Owner - RIES PEFORMANCE

                  Comment


                  • #10
                    Figured I'd throw this in here since I never posted this information up...

                    But as one would have expected the Fluidampr Mazda6 damper, p/n 571001 will work on all of our engines per the email I received from Fluidampr themselves...

                    Originally posted by Ivan @ Fluidampr
                    Hi Mike,

                    Thank you for your interest in Fluidampr products and services. I apologize for the delay, I have been out of the office since last week and the form mails were still being directed to my email.

                    You are correct; our Mazda damper part # 571001 should work for your application. It will fit the following applications:


                    FITS FOLLOWING MODELS WITH 2.5L/3.0L DOHC DURATEC V6 ONLY

                    FORD CONTOUR (1999 - 2000)
                    FORD CONTOUR GL (1995 - 1998)
                    FORD CONTOUR LX (1995 - 1998)
                    FORD CONTOUR SE (1995 - 1998)
                    FORD CONTOUR SPORT (1996 - 1997)
                    FORD CONTOUR SVT (1998 - 2000)
                    FORD ESCAPE (2001 - 2005)
                    FORD ESCAPE LIMITED (2006 - 2007)
                    FORD ESCAPE XLT (2006 - 2007)
                    FORD FUSION (2003-2009)
                    LINCOLN ZEPHYR 2006
                    MAZDA 6 (2003 - 2008)
                    MAZDA MPV (2000 - 2001)
                    MAZDA MPV (2003 - 2006)
                    MAZDA TRIBUTE 2001
                    MAZDA TRIBUTE DX 2002
                    MAZDA TRIBUTE ES (2002 - 2004)
                    MAZDA TRIBUTE LX (2002 - 2004)
                    MAZDA TRIBUTE S 2005 - 2008)
                    MERCURY COUGAR (1999 - 2002)
                    MERCURY COUGAR S 2001
                    MERCURY MARINER 2008
                    MERCURY MARINER LUXURY (2006 - 2007)
                    MERCURY MARINER PREMIER (2005 - 2008)
                    MERCURY MILAN (2006-2009)
                    MERCURY MYSTIQUE (1999 - 2000)
                    MERCURY MYSTIQUE GS (1995 - 1997)
                    MERCURY MYSTIQUE LS (1996 - 1998)
                    MERCURY MYSTIQUE YOUNG AMERICA 1995


                    Note: WILL NOT fit the Ford Taurus Duratec V-6, as the Taurus has a different belt pulley configuration.

                    If you have any other questions you may contact me via email or direct at 716-995-6232.


                    Best Regards,

                    Ivan Snyder III
                    Sales/Customer Service
                    Vibratech TVD/Fluidampr
                    Ph: 716-592-1000 X: 6232
                    Fax: 716-592-1001
                    Email: ivan.snyder@vibratechtvd.com
                    Email: ivan.snyder@fluidampr.com
                    -Mike
                    If you are wondering where the avatar came from look here... Link
                    98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                    85 Camaro - 1969 350ci, 503BHP

                    Owner - RIES PEFORMANCE

                    Comment


                    • #11
                      has anyone found the springs cheaper than 5.35 a piece?
                      98 3l SC #2354
                      98 3l #4594

                      Comment


                      • #12
                        doesn't seem to be cheaper then that, anywhere.
                        99 CSVT, 95 Exp Sport
                        -Justin

                        Comment


                        • #13
                          Originally posted by svtfixer View Post
                          has anyone found the springs cheaper than 5.35 a piece?
                          Yea, Tousley Ford has them on their website for $4.68... so if your replacing them all $112.32 + shipping. Although you could also buy the aftermarket brand Sealed Power valve springs (p/n: VS1646) for $1.76 a piece at RockAuto
                          -Mike
                          If you are wondering where the avatar came from look here... Link
                          98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                          85 Camaro - 1969 350ci, 503BHP

                          Owner - RIES PEFORMANCE

                          Comment


                          • #14
                            Just for reference....

                            Those people that are upgrading to the full 3L UIM and LIM (I'm referencing my experience with the 2005 3L) can pick up any SAE quick disconnect fitting that is 3/8" to any size AN fitting. I personally chose to use Aeromotive, which their part number is 15118. It goes from the SAE 3/8" quick connect to a AN-08 port. See pics below for reference.



                            -Mike
                            If you are wondering where the avatar came from look here... Link
                            98 SVT Contour - HoK TruBlue|CF roof|#49/6535 DOB 3/25/97|550whp here I come|Follow my extremely slow 3L/turbo build here Link
                            85 Camaro - 1969 350ci, 503BHP

                            Owner - RIES PEFORMANCE

                            Comment


                            • #15
                              Does anyone know the part# of this oil filter bolt?Oil-Cooler-Bolt..png

                              Comment

                              Working...
                              X