Originally posted by Stazi the Aussie:
If you can't fatten, add a rib at least. Rememebr beaming anaylsis from Uni?



Unfortunately, its not a matter of brackets stiffness at this point. Its a matter of getting a bolt to fit under the anchor bracket and still go through the adapter bracket and the mounts on the spindle. The brackets are actually significantly thicker/larger than I had originally envisioned due to package constraints but we are getting there.



JED,

Actually, we are working on a bracket that will work for the regular contour calipers as well, so all you would need is the rotors, brackets, and some new pads to go with the rotors.

Balance is the Key. rarasvt@comcast.net