Originally posted by Mystakin':
I get 12vdc to the fan motor wiring connector when the control knob is on Panel or Flr/Panel but the fan still does not work. I do not get any voltage when on Heat, Defrost, Defrost/Heat, or A/C.
-Is that part on the Resistor pack a Thermal fuse?
-Is it possible that both the Resistor pack & the switch
are bad?
-Is there anything else that I'm over looking?
Any help would be greatly appreciated?
John
John
I went through an ordeal with mineâ?¦ check this post.
It sounds to me like the resister pack is bad, but it could be the switch. You should be covered under warranty for both the resister and switch (extended warranty to 150k). I would replace the resister first and the switch second.
| 
