Originally posted by NVMYSVT:


my 19's are 40mm offset (8.0 widith and 235 series) and require spacers.. as there was meer millimeters between the wheel and my Koni's and there was rubbing. These are also on the Cougar but is should be the same dealio for the Contour. I have not yet attempted to put these on one of my CSVT's as I'm sure that there will be some rubbing issues.

I hope my information helps.



Thanks NVMYSVT

19's are one of the sizes I need the info on (also 18's) both with the same 8 inch width.

Above is what I'm afraid of. I need to make sure I get the correct offset so that I do not rub on the strut or the fender. I also do not want to use spacers. I have tried using them before but it seems my studs are not very long which only allows me to get a few solid turns w/ the lug nuts. Does not feel very safe.

Any additional info is greatly appreciated.

SOLD Polarg M-28 super bright white bulbs. Replace yellow stock license plate bulbs. See add in classifieds. WANTED:: EVO style CF hood