Originally posted by IonNinja:
so what kind of issues do you think you'll run into installation wise?



when i fitted the JRSC BBK to my mondeo 2ltr zetec last month i had to use a focus alternator and IAC valve. where the the front alternator bolt goes through, the inner wing was in the way so i used some threaded rod (studding) and fitted it from the inside out and put some loctite on a nut on each end.
the bracket which bolts under the intake manifold (to support the SC) to the block never fitted my engine ( i had a bracket which supports the drive shaft)so i had to modify the support bracket.another thing is you may need a focus fuel rail if you have the earlier zetec engine.
if you are going to use a larger TB you will need a focus throttle bracket if your TB doesnt have one and maybe a focus throttle cable.not sure if you'll (Buttonpuncher) have the same issues hope you dont. by the way my JRSC is the m45.
feel free to ask any questions (if you need to) and i'll do my best to help you
good luck and keep posting pics of your progress