i must have just missed that one area with the POR15.
anyhoo...i drained the tank and let it air dry, then used liquid weld for tank repair on the hole from the outside. let it dry for 3 hours and then tried again. it seems to have bonded and is holding OK for now.
took her for the first ride tonight! had to run with the hi-beam on, still not sure why the lo-beam and horn aren't working. i may try to find the fuse box. i may have blown something from trying to jump the old battery.
oh, got a new battery too.
still having some funkiness with the fuel petcock. it doesn't flood in "run" anymore, but it stalls after a while. I think the "run" and "reserve" lines are swapped. after the stall, i switch to "prime" for about 10 seconds and then it's fine.
shifts great! all 5 speeds synch up nicely.
only new issue is the tach, it's pinned at 11k RPM all the time. i think the spindle is stripped.
