I know that I did apply sealant to all the seams. It doesn't appear that its leaking from the crank seal, but its difficult to seebehind the damper to tell if anything is running out from there. I know I put a good amount of sealant on the seams on the heads (all 6 places) and on the block.front cover where the oil pan mates up. I think I'm gonna take off the UIM and valve covers and make sure the inside (where the LIM is) seals are in good and possibly put a small bead of sealant on the gasket. The power steering pump looks wet all over so maybe it it was leaking down inside there from the valve covers.
