Today I removed the front driver side knuckle assemble to have the bearing replaced. I picked up the new bearing from Ford (and axle nut) and tomorrow I will be pressing out and in the bearings myself at my friends machine shop. My question is which side of the knuckle do I press from and did I get the right bearing? The bearing in the picture has splines in the centre to engage the CV shaft, the new one doesn't.
Knuckle Back Side
Knuckle Front Side
New Bearing
99 CSVT Green/Tan
# 84 of 2760
Built on Wednesday, September 30, 1998
15.376 @ 92.00 MPH Stock
75,000Km
96 Contour GL
2.5L V6 ATX 170,000Km
