Originally posted by SHAutoTrends:
Originally posted by CSVT1214:
Ok, HVAC is installed. But......it doesn't light up at all like in the pictures Tyler posted. When it is getting dark, they are great. Red glows through nicely, but then totally dark, the whole center of the panel glows red. Kinda cool actually.

My only complaint I guess is that the panel is not cut correctly. The left side of the panel is not long enough and the clear plastic under the HVAC overlay shows at the very edge.

Anything that can be done about this Tyler? Are all of them cut exactly the same way?

It is only off by about 1mm.




They can all be remade. The HVAC panels have to be made differently than the guages due to the very low lighting the stock HVAC receives, however I will change things up once agian with some new things we got, and everything will come out perfect!


Agian a pic would be perfect! So I know exactly what to change.


Thanks,
Tyler



Here you go Tyler. Now that I'm thinking about it, 2 things I hope you can change. One being the fitment on the left side, the other being the red circles under the control knobs. They are just slightly too large and it sneak up from under the knobs and looks a little awkward. Can you just make the circles a tiny bit smaller?

Other than that, these HVAC panels are hot!!! I love it!




Red under knobs

Tony 1998 SVT Contour (B/MB) #542 3L 1998 SVT Contour (SF/MB) #1266 parts car 2000 SVT Contour (SF/MB) #1533 3L swap to begin!