Hi Guys,
While warming the car up this am ('98 se sport v6 atx) it just started running horribly. Shaking violently, won't rev (afraid to push it) CEL flashing (never seen that before!) and raw fuel (fuel, not water) coming out the tail pipe.
Pull codes and get
p0353 ignition coil primary/secondary circuit
p0302 cylinder 2 misfire
p0306 cylinder 6 misfire
p0174 bank 2 too lean
p0171 bank 1 too lean
I'm guessing this leads to a bad coil based on searching, but I only saw one other reference to 0353, and there was no resolution. 0302 had a few referencing plugs/wires (oe plugs, 2 months old, oe wires, about 20k on those)
Thoughts? opinions? I saw a resistance spec on coil testing for the zetec, anyone have similar for the v6? Can't find my shop manual.
Thanks, as always
Scott
