There is 10 total. 5 to start with, not 4, to remove the bezel. One behind the defroster switch on the right side, 2 above the lexan on the cluster, and 2 behind the contour logo under the center vents. Once those are off, then there is 5 screws holding the cluster in, 3 on the bottom and 2 on top. Then you have to pop the 2 multiplugs out, and then pry the black tabs with a flathead screwdriver to remove the lexan covering. After that, if you want to remove the gauges, there is various torx bolts holding them in. Lots of screws to remove!
