Originally posted by DanG:
It does not- The nut goes on the engine side.

I pulled a powertrain out this past weekend, so I remember it clearly. The stop collar stops on the trans case- There is nothing on the engine side to stop it.



Exactly. There is a slot for the tab on the transmission bell housing. Should be self explanatory when you try to fit it.
Looking from the back of the transmission, left side second bolt up from the bottom IIRC.

Former owner of '99 CSVT - Silver #222/2760 356/334 wHP/TQ at 10psi on pump gas! See My Mods '05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red '06 Mazda5 Touring, 5spd,MTX, Black