Originally posted by fastcougar:
I have a graduated pippet so I can cc the chamber volume to ensure uniformity in the cc measurements. I will post pictures as usual




Never heard of that!

J/k

Hey, if you can do it, use solvent instead of water. Water has a higher surface tension.
Whatever, it will work well enough either way, but alcohol will not bubble as much and although it is polar, it isn't as bad as water.

Good luck.

Former owner of '99 CSVT - Silver #222/2760 356/334 wHP/TQ at 10psi on pump gas! See My Mods '05 Volvo S40 Turbo 5 AWD with 6spd, Passion Red '06 Mazda5 Touring, 5spd,MTX, Black