Originally posted by Kremithefrog:
Originally posted by Auto-X Fil:
Did you really take the time to grease and clean everything when you put them on, and bed them in properly? A good brake job involves more than just slapping pads on. Not implying you didn't, just asking. My first time was horribly squeaky as well.


I greased the back of the pads. I didn't grease the bolts on the front calipers but did the rears since I also replaced the rear calipers (one was seizing). I sorta bedded them in. Bedding didn't matter too much, since this weekend they're really gonna get bedded in over and over and over and over (hopefully).




My CSVT has new calipers, SS brake hoses, KVR slotted and drilled rotors w/ KVR CF pads [no shims at all], went light on the grease [cars from the factory don't have grease slopped all over everything], followed the break-in guide lines. Great stopping power and I've never had a problem with noise.